833M0L3
Firmware version 020809 has patched this method
Hi, how did you find out that the manufacturer was Home Digital? This method works on our old settop box but MI remote (with Home Digital selected) doesn't respond on a newer box.
Both have model no. GX-1000 on the bottom & the physical remote for the old one works with the new one as well
@dinesh-58 Could you check the firmware version of your NETTV Set up box? It seems like the latest one has patched this method.
Launcher version is the same for both but build version is different.
Old one:
New one:
@dinesh-58 Yes , that's the firmware version. Seems like they patched it on the 20809.
That sucks. Do you know the exact chipset used in these? Or should I just open up the box? I found one guy that makes custom roms for these type of boxes. https://aidanrom.com/
@dinesh-58 The white box runs on Amlogic S905X.
If you want to bypass the app install restrictions, then there is another method.
You could open the setupbox and use it's UART pin to directly get the shell. And using the shell you can install any apk. I did it using that method.
@dinesh-58 You could also try downgrading the firmware. I have the firmware of version 020F07. I downloaded it through NETTV's OTA download link when it was being pushed to the masses.
Mine is the older version but there is no Developers Option to enable usb debugging, it tried without it and it says adb no connection could be made because the target machine actively refused it. Please help
Im not a tech guy, i am related to management field, the 2nd option looks risky
@Subas78 if you were able to get into android settings using MI remote, follow these steps to enable developer settings:
- In android settings, scroll to the bottom and go to
About media box - Find build number and press ok button around 7 times (until it says that you are a developer)
- Now if you go back, you will find developer settings and can enable usb debugging there
USB debugging is solved, and i have installed, that launcher as well, but i don't know why it finds it harder to install heavy size apk such as aptoid TV and Es file explorer.
@Subas78 Harder as in , it's taking bit more time to install ?
If that's the case then make sure your device has a good wifi coverage or Ethernet cable is good if you are using one. Big apk takes time as it has be transferred to the TV box through the network and takes a lot of bandwidth.
It failed during the installation process. Yea you're right it must be because of slow Internet connection i will try with Ethernet cable. Thanks a lot for the support. It worked, am sure this problem will be solved as well.
@Subas78 Could you share the error message of the adb when the installation fails?
Hello, could you share the UART pin layout of this board pls ? I don't have a multimeter to test it myself.
@833M0L3 020F07.zip is no longer available. Could you upload it in main? Also, is there any new method of accessing the android settings? Home Digital doesn't respond to the power button from Xiaomi phone. Thanks
@833M0L3 , I am new to serial communication but I wanted to try and I purchased a TTL-USB converter and connected the jumper cable like the following using the device pin map you shared.
GND (Device) -> GND (USB to TTL) TXD (Device) -> RXD (USB to TTL) RXD (Device) -> TXD (USB to TTL)
I am unable to get any response in PuTTY. My USB is connected to COM3 and terminal does open. However, when I don't connect GND, I get back some garbled text but when I connected GND as well, there is no response at all.
Could you provide a guide on what parameters you put in PuTTY— baud, parity, bits, stops. How did you manage to open shell and then connect with adb to install apps?
Thanks in advance!
@pranavkafle Hi could you open a new issue for this? Github issues are meant for focusing on just one specific problem. Also, everyone who has ever left a comment here gets notified about your comment