4712

Click with right mouse button on "raw"... 

BLHeliSuite32 always carries all published hex files up to the release date, so 32.0 up to 32.8. Also if any test files are published, it will say, if it can...

Sorry to read about this failure. Because the bootloader has no chance to interact with BLHeliSuite32 before the start up music is played till the end, it will be hard...

Could you try to "Connect" in BLHeliSuite32 first, then power up the ESCs and after 2 or more seconds "Read Setup" ?

@Balint134 Please check with the latest revision 32.6.0.8. Hope it's fixed now.

It looks like, if the ESC's are not connected to the FC board, or they are not connected to the battery. Do you hear initialization beeps of the motors when...

I guess the nuts do not short the motor wires? If you do not hear any beeps from the motors when connecting the battery, something seems to be wrong with...

The each ESC normally beeps at least 3 times on power up, even if only a motor and a battery with appropriate voltage is connected. This is independent from the...

Sorry, I don't know either.

@jitzejaap One more question: Did you unplug everything from the board you can, before connecting the battery and listening for beeps?