Initializer fails: Unexpected TLS Version 4 0

[flofeld]

I am running arch and got stuck in the initialization process

WARNING: cgroup v2 is not fully supported yet, proceeding with partial confinement
Found device <DEVICE ID 138a:0097 on Bus 001 Address 004>
Downloading https://download.lenovo.com/pccbbs/mobiles/n1mgf03w.exe to extract 6_07f_lenovo_mis.xpfwext
Extracting "Synaptics Metallica MOC Touch Fingerprint Reader Driver for Windows 8.1 64-bit" - setup data version 5.5.0
 - "app/WBF_Drivers/6_07f_lenovo_mis.xpfwext"
Done.
Found firmware at /tmp/tmpg2p72nqj/app/WBF_Drivers/6_07f_lenovo_mis.xpfwext
The device will be now reset to factory and associated to the current laptop.
Press Enter to continue (or Ctrl+C to cancel)...
Opening device 0x97
Factory reset...
Sleeping...
Pairing the sensor with device 20HES01100
Opening device 0x97
Initializing flash...
Detected Flash IC: W25Q80B, 1048576 bytes
Sleeping...
Try 1 failed with error: Failed: 04af
Opening device 0x97
Initializing flash...
Sleeping...
Try 2 failed with error: Unexpected TLS version 4 0
Opening device 0x97
Initializing flash...
Sleeping...
Try 3 failed with error: Unexpected TLS version 4 0
Opening device 0x97
Initializing flash...
Sleeping...
Try 4 failed with error: Unexpected TLS version 4 0
Opening device 0x97
Initializing flash...
Sleeping...
Try 5 failed with error: Unexpected TLS version 4 0
Device didn't reply in time...
Traceback (most recent call last):
  File "/snap/validity-sensors-tools/65/vfs-tools/validity-sensors-tools.py", line 339, in <module>
    vfs_tools.initialize(fwpath, args.calibration_data)
  File "/snap/validity-sensors-tools/65/vfs-tools/validity-sensors-tools.py", line 249, in initialize
    self.pair(fwpath, calib_data)
  File "/snap/validity-sensors-tools/65/vfs-tools/validity-sensors-tools.py", line 220, in pair
    self.retry_command(init_flash_command, max_retries=5)
  File "/snap/validity-sensors-tools/65/vfs-tools/validity-sensors-tools.py", line 112, in retry_command
    raise(err)
  File "/snap/validity-sensors-tools/65/vfs-tools/validity-sensors-tools.py", line 103, in retry_command
    command()
  File "/snap/validity-sensors-tools/65/vfs-tools/validity-sensors-tools.py", line 219, in init_flash_command
    init_flash()
  File "/snap/validity-sensors-tools/65/vfs-tools/proto9x/init_flash.py", line 97, in init_flash
    partition_flash(flash_layout_hardcoded, client_public)
  File "/snap/validity-sensors-tools/65/vfs-tools/proto9x/init_flash.py", line 70, in partition_flash
    info = get_flash_info()
  File "/snap/validity-sensors-tools/65/vfs-tools/proto9x/flash.py", line 28, in get_flash_info
    rsp=tls.cmd(unhex('3e'))
  File "/snap/validity-sensors-tools/65/vfs-tools/proto9x/tls.py", line 104, in cmd
    rsp=self.app(cmd)
  File "/snap/validity-sensors-tools/65/vfs-tools/proto9x/tls.py", line 138, in app
    return self.parse_tls_response(self.usb.cmd(self.make_app_data(b)))
  File "/snap/validity-sensors-tools/65/vfs-tools/proto9x/tls.py", line 336, in parse_tls_response
    raise Exception('Unexpected TLS version %d %d' % (mj, mn))
Exception: Unexpected TLS version 4 0

Is there something I can do about it?

[gaidap]

Hi, encountered the same problem on Ubuntu 20.04 on my ThinkPad T470s.

[danielfreyr10]

Hi, I also encountered the same error on a Thinkpad X1 with Linux Mint 20.1

[reyhankim]

Hello, I also encountered this same error on Thinkpad Yoga 370 with Ubuntu 20.04

[btnpushnmunky]

Same issue on Thinkpad P50 with Pop!_OS 21.04.

[synaps13]

Same on Ubuntu 21.04 ThinkPad t470s 138a:0097 Validity Sensors, Inc.

[steinhmor]

Same on Pop!_OS 21.04 (based on Ubuntu) Thinkpad T470 138a:0097 Validity Sensors, Inc.

[JustinJohnsonBlues]

Same on Thinkpad X1 5th with Ubuntu 20.04

[birchtree02]

Same on Thinkpad X1 carbon 4th on Fedora 34. Has anyone found a solution to this?

[stefanokan]

Same on Thinkpad T570 with Linux Mint 20.2 XFCE: error.txt

[squarecode]

For anyone still searching for a solution and because this project seems to be dead: Have a look at this one https://github.com/uunicorn/python-validity

Working fine for me on my t470s

[btnpushnmunky]

For anyone still searching for a solution and because this project seems to be dead: Have a look at this one https://github.com/uunicorn/python-validity

Working fine for me on my t470s

This did not work for me on my P50.

[MartinX3]

@squarecode that won't work. You compare a hardware driver with a python userland tool to access a hardware driver.

[plabadens]

@MartinX3 That is incorrect, the python-validity driver accesses the device directly (likely through libusb bindings). I was able to test this out in a Python REPL on my x270. Also, fprintd is a userland tool as well, as it does not run in the kernel. The difference between this project and uunicorn/python-validity is that this one is an fprintd fork that handles the device directly, whereas the other is a (different) fprintd fork that uses dbus to communicate with a userland driver written in python.

[MartinX3]

@plabadens that is incorrect https://github.com/uunicorn/python-validity is no fprintd fork. 100% of its code is written in python. You still need a fprintd driver package on your computer. And you repeat me and combine it with a wrong explaination.

[plabadens]

It requires open-fprintd, a fork of fprintd by the author of python-validity to work: https://github.com/uunicorn/open-fprintd

[MartinX3]

Yes, it requires an fprintd package and is not a fprintd fork itself, like I already said 2 times...

[ChrissyAFK]

Hi, Same issue on Thinkpad x1 carbon 6th gen running endeavourOS (arch distro) 06cb:009a Synaptics, Inc. Metallica MIS Touch Fingerprint Reader

[raz0229]

Still fails to enroll for my Lenovo P50 138a:0090

[foxmajik]

You all can stop commenting that it's still not working.

This project was abandoned a long time ago.

[MartinX3]

You all can stop commenting that it's still not working.

This project was abandoned a long time ago.

The last comment was 3 months ago.

And I use my comment to greet my mother. Hi mom!