beqdesigner
beqdesigner copied to clipboard
3ll3d00d
mapping dialog on the HTP-1 screen allows for mapping multiple channels to a single signal, this should be represented in the main signal model as a master slave relationship
It might be better for it to point to the release page, rather than straight to the .exe (as the version I was using was the Setup version, not the...
atm if you do extract audio save wav load wav then the channel layout may be different from extract audio create signals
this probably needs refining a little bit so that it shows the selected signal in the waveform view unless the user has explicitly picked a waveform to look at _Originally...
Using the auto-remux does not seem to match with the headroom values shown In my test the auto adjust was adjusting the remux by -5.11 DB After analyzing the extracted...
compare FR in the 1-4kHz frequency range for filtered vs unfiltered, set offset accordingly
Applying fractional octave smoothing lifts the level significantly, some of this is to be expected but the difference is really quite large so it needs further investigation to determine if...
for display in the filter dialog _Originally posted by @3ll3d00d in https://github.com/3ll3d00d/beqdesigner/issues/133#issuecomment-436546372_