3d-gussner

**Copy of my [comment](https://github.com/3d-gussner/Prusa-Firmware/issues/72#issuecomment-625797183)** The LA1.0 to LA1.5 conversion is way off for this filament with K=0.21 vs. real LA15 K=0.11. So the issue is in the conversion OR in...

** Copy of @Vossberger [comment](https://github.com/3d-gussner/Prusa-Firmware/issues/72#issuecomment-633456270)** Once again to this test set. It is possible that I did not adjust the eSteps before changing the FW again (I use a 0.9...

Octoprint photo is moving the head aside and taking a photo and continuies to print, correct? I think this is another issue as the hotend will ooze some filament during...

**Copy of @mmuellerphoto [report](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-625847782)** Prusa i3 Mk3s, 3.9.0-RC3, 0.13K, "Stock Version" except Ruby nozzle @150mm/s (via Octoprint): Artifacts 4, Corners 4-6 (depending on corner), Ghosting 3, Quality 3 @125mm/s (via...

** Copy of @wavexx [comment](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-626352971)** The interesting tidbit here seems that the line is closed where the "Y-axis" is not there.

**Copy of @wavexx [comment](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-626354304)** @mmuellerphoto could you just make one try with the 3.8.1, at a fast speed like 150 or 125mms? I'm curious if this got worse. Also, pay...

**Copy of @Vossberger [report](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-626531841)** => 3.9.0-RC3, 0.11K, FilamentumPM PLA, SD-Card, 2 x Tests (w/o Infill+Top+Bottom) @150mm/s : Artifacts 4, Corners 5-6 (depending on corner), Ghosting 3, Quality 7 Wall thikness...

**Copy of @mmuellerphoto [feedback](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-626835286)** @wavexx ... So like promised the additional test ... Prusa i3 Mk3s, 3.8.1, 44K, "Stock Version" except Ruby nozzle @150mm/s (via Octoprint): Artifacts 6, Corners 5-7...

**Copy of @wavexx [comment](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-626969638)** The automatic switching doesn't work out-of-the-box for K patterns of old LA 1.0 test files depending on the values (the first K value generally switches the...

**Copy of @wavexx [comment](https://github.com/3d-gussner/Prusa-Firmware/issues/73#issuecomment-626973282)** > @wavexx ... So like promised the additional test ... > Prusa i3 Mk3s, 3.8.1, 44K, "Stock Version" except Ruby nozzle > @150mm/s (via Octoprint): Artifacts...