3Dangel

Note you need to change SPI 1 to SPI2 in platformio ( outside of Marlin) Check YouTube video on mks sbase Marlin Install. And you will learn where to look....

devvratsompura Which version of Tobin board do you have? Cause I have v1.0 & V 2.1

Hi Jf It would be interesting to post the working Marlin from your end and see if Marlin Dev. Would take the portion that might be issuing and forge them...

i got it to work! https://github.com/MarlinFirmware/Marlin/issues/9771

have you guys tried this? https://github.com/makerbase-mks/MKS-DLC32-FIRMWARE/tree/main/Firmware/Grbl_Esp32 > So i have been waiting 3 months for MKS to sort their dam firmware out, multiple issues reported on the latest version, I...

> @aroef It works fine with TTL G to L and S to IN and how did you fixed it with homing? You didn't use the homing function, right? Bc...

> Hi @aroef  > > A better view of my wiring It works great $h don't work if you don't have a Z axis. But you can bypass it...

Hi PunkRa1n I'm not aroef. :-) and you are welcome about the $32=1 The consensus is that the laser tube in our K40, should not over powered beyond 15mA. the...


CAUTION!!!: here is what I have as wiring AND IT DOES NOT WORK on DLC32 V2.X: Due to changes in V2.x that TTLs Gnd has changed and it is a...