3Dangel

The sets of calibrationX & Y On Mon, Feb 3, 2020 at 14:52 Robert Ni wrote: > The touch bottoms need to be enabled. And there are 2 sets of...

Make sure you use the tool to see what are your calibration #. And it tells you also what LCD processor is. V1.1 should be ili9328 On Mon, Feb 3,...

Mmmmmmm I’m afraid that this is an even older lcd cpu. Mine was 9328 and just in Nov/Dec got it to work. It is about the initialization of the LCD...

Maybe to get another mKS LCD touch screen? I haven’t got home yet. Will try to find my working Marlin and see if I can upload it to GitHub. And...

I totally understand. Been there. On Mon, Feb 3, 2020 at 19:00 yassinelessawy wrote: > I can't get another mks screen. I can't ship any kind of electronics it >...

Ok. Try this. Your LCD is 9235 The only thing you can try is: In Marlin/scr/lcd/dogm/u8g_dev_tft_320x240_upscale.....cpp Find Case 0x9328: Change it to Case 0x9325: And see if you get lucky....

Not a problem at all I’m really happy for you!!!! Please let me know the outcome with the exact value for the calibration. Because I might gather all this info...

It is try on error. The SD card mainly will be used manually initializing it. Do SD detect should be -1. Will check tomorrow how mine was set. Cheers On...

here is the section of the pin definition that you can find in the pins/stm32/mks-robin #define ENABLE_SPI2 #if ENABLED(SDIO_SUPPORT) #define SCK_PIN PB13 // SPI2 #define MISO_PIN PB14 // SPI2 #define...

Unfortunately, my knowledge on the subject has reached its limit. Beyond what you just explained to me, I am not familiar at all with the symptom your screen has. Wish...