3Dangel

you need to search YT LCD fix. most likely you would need to reverse connectors on Exp1 and Exp2 On Thu, Oct 1, 2020 at 2:28 PM oguzefe wrote: >...

Then you would need to find WHAT LCD are you using and WHAT pins you are using to connect the LCD to the main board and enable the right LCD...

The latest upgrade from platformio to 4.1 none of the FW can be complied. Not sure if any other sees this or it is just me. On Wed, Nov 20,...

Then it is confirmed!!! Makerbase, would you please test and advise the solution!? Thanks a lot!!! On Wed, Nov 20, 2019 at 15:16 maureu-too wrote: > Hi, I successfully compiled...

The repository from MKS is an old work from a gentlemen from Russia I think. He was able to make it to work with his own coding. Now the NEW...

I would compare the pins assignment and how it is configured in mks-Robin and verify the pinout from the schematic. Mks-Robin touch is working. Check the issue case in mks-robin...

Yours is the latest version that they just forked to. Mine worked with the green original settings. Thanks for advise as I am about to upload the newest updated FW...

Hello Technology89, Would it be possible to get zip file from you? I’m having issue with my just downloaded version of Marlin. The old one that I had for s...

I don’t think that LCD controller is supported. Each different controller has its own initializing sequences, hence if it is not written by a developer, it won’t be able to...

You probably can get the MKS’s firmware to work with them. And also work with octoprint. Or you could write the needed initializing codes. On Fri, May 15, 2020 at...