Florian

Could you share the logs with TRACE log level please? You can change it in the WebUI.

Thanks, no need to redo it, the difference was only to decrease the minimum memory trigger for reboot. Could you try to deactivate `discovery` please ?

> I have the same problem. How do you revert to v1.6 when it constantly crashes and reboots? After erasing the credentials, from the config portal access point you can...

Can one of you test this firmware ? [lilygo-rtl-433-test-firmware.zip](https://github.com/1technophile/OpenMQTTGateway/files/13688367/lilygo-rtl-433-test-firmware.zip)

Not sure how familiar you are with [PlatformIO ](https://docs.openmqttgateway.com/upload/builds.html#configure-upload-with-platformio)? It would be interesting to have the decoding of the exception thanks to it. This could be done by adding `monitor_filters...

I found maybe something, could you try these three firmware and let me know if one or several works for you [firmware-lilygo-test.zip](https://github.com/1technophile/OpenMQTTGateway/files/13691140/firmware-lilygo-test.zip) Thanks for your help. I don't have the...

Thanks for these tests, I will propose other tests later on. No need to setup platformio unless you want to try it.

Here are 2 other firmware for testing: [firmware_dynamic-tests.zip](https://github.com/1technophile/OpenMQTTGateway/files/13694209/firmware_dynamic-tests.zip)

> Is there anything I can do to help troubleshoot this further...? I have only flashed the ESP32 using the OMG website before, how would I go about flashing the...

Thanks, I see that the stack memory is decreasing before each crash, could you try this one, it has DEBUG activated for RTL_433 and more stack memory [firmware-rtl-debug.zip](https://github.com/1technophile/OpenMQTTGateway/files/13696882/firmware-rtl-debug.zip)