Jerry Morrison

Is it known what gets the OpenEVSE into 6A mode? Is there a reliable way to get the OpenEVSE out of 6A mode?

@danpadure did you enter `/claims` into the Configuration > Developer > RAPI Commands (after the `$`), then hit `Send`, and get back `< $NK^21`? Ditto with `/override`? It's not restoring...

Charging amps are oscillating up and down between 5.94A to 15.84A while the Max amps are going back and forth between 6A vs. 40A. Sometimes the car says it's drawing...

Screen recordings: https://github.com/user-attachments/assets/3a5e0d06-f65f-41ee-aa34-4d8508c70aa1 https://github.com/user-attachments/assets/bf4804bd-6343-4a1c-821b-b2db27c3e1de https://github.com/user-attachments/assets/1512a1a8-8b76-4ca3-a9d3-42b0b7f0dab6

@KipK interesting! I haven't issued any RAPI commands except for misunderstanding the web API commands that @danpadure recommended. What I did that could be relevant was plug in the EV,...

Testing charging after the Restart steps via the web UI, it's steady but slow at 6.2A, `{"amp":6160,"voltage":240,"power":1478.4}`. No "heartbeat failed" messages. ``` $FP 0 0 Charging~~~6.16A^8D $OK^20 $SY^2E $OK 5...

I tried these steps and some variations but didn't succeed in reproducing the problem: 1. Plug in an EV. 2. Use the web UI to set a session energy limit...

I haven't seen this symptom repeat while using this charging procedure for 5 months: 1. Clear any charge limit set by partner. [Specifically the kWh charge energy limit.] 2. Plug...

Cool! How to set it? * On the charge screen, LIMIT > New > Energy will set a limit that measures energy, but the per session limit remains for future...

@danpadure, the EVSE Settings screen has: * a MAX CURRENT setting, 6 - 40A (amps) limit * SYSTEM LIMIT settings Time (hours:minutes) or Energy (kWh) limits [Are these per charge...