0x0fe

@wendal any update on this? ``` AT+COPS=? +COPS: (2,"T-Mobile USA","TMO","310260"),,(0-4),(0-2) OK Available Networks: Network Name->T-Mobile USA Network ID->310260 Network Status->Current AT+COPS? +COPS: 0,0,"T-Mobile USA" OK Device is currently on "T-Mobile...

thanks, i see, is this the official response @sakumisu

> When ESP32 has ETH and STA working, how should it work? What is the default route? IDF has no router software implemented. Therefore, it may be necessary for the...

so, i guess that would be how lwIP binds one interface to one socket https://github.com/espressif/arduino-esp32/blob/371f382db7dd36c470bb2669b222adf0a497600d/tools/sdk/esp32/include/lwip/lwip/src/include/lwip/api.h#L330

there was no hardware issue, what you describe is what was actually implemented (star topology with FBs) it is standard practice for PHY. Single connection point for AGND is also...

@mrengineer7777  This issue is due to lwip not arbitrating multiple active I/F, lwip can handle multiple active interfaces but there must be some additional work to define/handle priorities (i...

no update in 2 years, i would say this is dead.

for information, here is the log of the exact same test code ran in arduino, with the conservative sdkconfig. log ``` 523 16KB 20ms 1 1KB 2ms 1 1KB 4ms...

@igrr sure, i am going to run this, on the test board i dont have the SD_MMC installed, so maybe i'll have to comment that part. Thank you for editing...

so, i added my own wifi_init, and disabled the writing to SD card. Indeed the dowwnload speed is 1.8MB/s. ``` (1898) wifi:AP's beacon interval = 102400 us, DTIM period =...