What to doo

[Maersk69]

What to doo :(

[19:40:59] INFO: Preparing to start... [19:40:59] INFO: Socat not enabled [19:40:59] INFO: Starting Zigbee2MQTT... [2024-06-05 19:41:01] info: z2m: Logging to console, file (filename: log.log) [2024-06-05 19:41:01] info: z2m: Starting Zigbee2MQTT version 1.38.0 (commit #unknown) [2024-06-05 19:41:01] info: z2m: Starting zigbee-herdsman (0.49.2) [2024-06-05 19:41:02] info: zh:ember: Using default stack config. [2024-06-05 19:41:02] info: zh:ember: ======== Ember Adapter Starting ======== [2024-06-05 19:41:02] info: zh:ember:ezsp: ======== EZSP starting ======== [2024-06-05 19:41:02] info: zh:ember:uart:ash: ======== ASH NCP reset ======== [2024-06-05 19:41:02] info: zh:ember:uart:ash: RTS/CTS config is off, enabling software flow control. [2024-06-05 19:41:02] info: zh:ember:uart:ash: Serial port opened [2024-06-05 19:41:02] info: zh:ember:uart:ash: ======== ASH starting ======== [2024-06-05 19:41:04] info: zh:ember:uart:ash: ======== ASH NCP reset ======== [2024-06-05 19:41:04] info: zh:ember:uart:ash: ======== ASH starting ======== [2024-06-05 19:41:07] info: zh:ember:uart:ash: ======== ASH NCP reset ======== [2024-06-05 19:41:07] info: zh:ember:uart:ash: ======== ASH starting ======== [2024-06-05 19:41:09] info: zh:ember:uart:ash: ======== ASH NCP reset ======== [2024-06-05 19:41:09] info: zh:ember:uart:ash: ======== ASH starting ======== [2024-06-05 19:41:12] info: zh:ember:uart:ash: ======== ASH NCP reset ======== [2024-06-05 19:41:12] info: zh:ember:uart:ash: ======== ASH starting ======== [2024-06-05 19:41:14] error: z2m: Error while starting zigbee-herdsman [2024-06-05 19:41:14] error: z2m: Failed to start zigbee [2024-06-05 19:41:14] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions [2024-06-05 19:41:14] error: z2m: Exiting... [2024-06-05 19:41:14] error: z2m: Error: Failed to start EZSP layer with status=HOST_FATAL_ERROR. at EmberAdapter.initEzsp (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:850:19) at EmberAdapter.start (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:2683:24) at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:127:29) at Zigbee.start (/app/lib/zigbee.ts:62:27) at Controller.start (/app/lib/controller.ts:109:27) at start (/app/index.js:107:5)

Addon version

??

Platform

Core 2024.5.5 Supervisor 2024.05.1 Operating System 12.3 Brugerflade 20240501.1

Logs of the issue (if applicable)

No response

[Lymkin]

Looks like you switched from ezsp to ember driver. I had the same issue. I had to manually edit the configuration.yaml and change the setting from "adapter: ezsp" to "adapter: ember". Restart addon. The Home Assistant integration where you are supposed to change it didn't reflect in this file.

[Nerivec]

When the adapter loops the ASH starting without success like this, it usually means the adapter firmware doesn't match the z2m configuration (baudrate most likely, if you didn't flash a 115200 firmware -default-, you need to specify which one you flashed in the z2m configuration). https://www.zigbee2mqtt.io/guide/configuration/adapter-settings.html#configuration-of-the-zigbee-adapter

If that doesn't work, can you switch log level to debug and post the logs?

[github-actions[bot]]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days