x2ocoder

@looxonline Consider adjusting the policy for releasing pinouts. If the team released pages 9 and 10 documenting A1-100 and B101-200, it would have made the module much easier to use...

Congratulations on your new position! As a recommendation for the other boards, clarify which pins are for the MCU vs the CB1. Exposed Names for user-side pins without knowing which...

Here's an example of where a 40 Pin Header Pinout should be reclarified/rechecked since CB1-PG7 does not **seem** to actually go to the 40 Pin Header as documented. https://github.com/bigtreetech/Manta-M4P/issues/7

PG7/8/9 is documented as going to the BT Module in this PDF PH10 is documented as Reserved GPIO in this PDF yet is exposed on the 40 Pin Header https://github.com/bigtreetech/CB1/blob/master/Hardware/BIGTREETECH_CB1_V22_220812_SCH.pdf...