upsert

Probably adding this too: https://fccid.io/JPZ0122. A new Radio RA2 / RA2 Select dimmer. Model RRD-PRO, 120 V, 250 W LED/CFL load. Looks like the two-wire RRD-6CL but with 250 W...

Firmware 06.11.04f000 dropped. No change.

Firmware 06.12.01f000 is out. I expect it will be for the [motion sensor and repeater](http://www.lutron.com/en-US/Company-Info/Pages/News/Media-PressCenter/PressReleases/PressReleaseDetail.aspx?prid=796) they just added to Caseta. Unfortunately that does not mean motion sensors over telnet have...

Firmware 08.00.06f000 is out. Big version number jump, so maybe this one is the occ/vac sensor and repeater for Caseta. Apparently the motion sensor is not supported on HomeKit either,...

@zwily The hub broadcasts a status including the firmware version using mDNS and DNS-SD and I periodically use the [Bonjour Browser](https://hobbyistsoftware.com/bonjourbrowser) to check it.

@bdubsw Yes, since 2018 on the Ra2 Select line. They are using the same hardware for Caseta.

It may be possible over HTTPS/JSON, but I will leave that to the Caseta integration to reverse engineer the protocol. This integration is only for the Telnet-based Lutron Integration Protocol....

Firmware 08.01.13f000 is out. No changes to the telnet interface.

I have attempted to simplify the state updates again for the sensor. Releasing the button will always set the state back to zero and the states are no longer combined...