rc9 chore(deps): update pnpm to v10

chore(deps): update pnpm to v10

Open renovate[bot] opened this issue 9 months ago • 0 comments

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
pnpm (source)	`8.15.9` -> `10.7.0`

Release Notes

pnpm/pnpm (pnpm)

`v10.7.0`

Compare Source

Minor Changes

pnpm config get and list also show settings set in pnpm-workspace.yaml files #9316.
It should be possible to use env variables in pnpm-workspace.yaml setting names and value.
Add an ability to patch dependencies by version ranges. Exact versions override version ranges, which in turn override name-only patches. Version range * is the same as name-only, except that patch application failure will not be ignored.

For example:
```
patchedDependencies:
  foo: patches/foo-1.patch
  foo@^2.0.0: patches/foo-2.patch
  [email protected]: patches/foo-3.patch
```
The above configuration would apply patches/foo-3.patch to [email protected], patches/foo-2.patch to all foo versions which satisfy ^2.0.0 except 2.1.0, and patches/foo-1.patch to the remaining foo versions.
[!WARNING] The version ranges should not overlap. If you want to specialize a sub range, make sure to exclude it from the other keys. For example:
```
# pnpm-workspace.yaml
patchedDependencies:
  # the specialized sub range
  '[email protected]': patches/foo.2.2.0-2.8.0.patch
  # the more general patch, excluding the sub range above
  'foo@>=2.0.0 <2.2.0 || >2.8.0': 'patches/foo.gte2.patch
```
In most cases, however, it's sufficient to just define an exact version to override the range.
pnpm config set --location=project saves the setting to a pnpm-workspace.yaml file if no .npmrc file is present in the directory #9316.
Rename pnpm.allowNonAppliedPatches to pnpm.allowUnusedPatches. The old name is still supported but it would print a deprecation warning message.
Add pnpm.ignorePatchFailures to manage whether pnpm would ignore patch application failures.

If ignorePatchFailures is not set, pnpm would throw an error when patches with exact versions or version ranges fail to apply, and it would ignore failures from name-only patches.

If ignorePatchFailures is explicitly set to false, pnpm would throw an error when any type of patch fails to apply.

If ignorePatchFailures is explicitly set to true, pnpm would print a warning when any type of patch fails to apply.

Patch Changes

Remove dependency paths from audit output to prevent out-of-memory errors #9280.

`v10.6.5`

Compare Source

`v10.6.4`: pnpm 10.6.4

Compare Source

Patch Changes

Fix pnpm dlx with --allow-build flag #9263.
Invalid Node.js version in use-node-version should not cause pnpm itself to break #9276.
The max amount of workers running for linking packages from the store has been reduced to 4 to achieve optimal results #9286. The workers are performing many file system operations, so increasing the number of CPUs doesn't help performance after some point.

Platinum Sponsors

Gold Sponsors

`v10.6.3`

Compare Source

Patch Changes

pnpm install --prod=false should not crash, when executed in a project with a pnpm-workspace.yaml file #9233. This fixes regression introduced via #9211.
Add the missing node-options config to recursive run #9180.
Removed a branching code path that only executed when dedupe-peer-dependents=false. We believe this internal refactor will not result in behavior changes, but we expect it to make future pnpm versions behave more consistently for projects that override dedupe-peer-dependents to false. There should be less unique bugs from turning off dedupe-peer-dependents.

See details in #9259.

`v10.6.2`

Compare Source

Patch Changes

pnpm self-update should always update the version in the packageManager field of package.json.
Fix running pnpm CLI from pnpm CLI on Windows when the CLI is bundled to an executable #8971.
pnpm patch-commit will now use the same filesystem as the store directory to compare and create patch files.
Don't show info output when --loglevel=error is used.
peerDependencyRules should be set in pnpm-workspace.yaml to take effect.

`v10.6.1`

Compare Source

Patch Changes

The pnpm CLI process should not stay hanging, when --silent reporting is used.
When --loglevel is set to error, don't show installation summary, execution time, and big tarball download progress.
Don't ignore pnpm.patchedDependencies from package.json #9226.
When executing the approve-builds command, if package.json contains onlyBuiltDependencies or ignoredBuiltDependencies, the selected dependency package will continue to be written into package.json.
When a package version cannot be found in the package metadata, print the registry from which the package was fetched.

`v10.6.0`

Compare Source

Minor Changes

pnpm-workspace.yaml can now hold all the settings that .npmrc accepts. The settings should use camelCase #9211.

pnpm-workspace.yaml example:
```
verifyDepsBeforeRun: install
optimisticRepeatInstall: true
publicHoistPattern:
  - "*types*"
  - "!@&#8203;types/react"
```
Projects using a file: dependency on a local tarball file (i.e. .tgz, .tar.gz, .tar) will see a performance improvement during installation. Previously, using a file: dependency on a tarball caused the lockfile resolution step to always run. The lockfile will now be considered up-to-date if the tarball is unchanged.

Patch Changes

pnpm self-update should not leave a directory with a broken pnpm installation if the installation fails.
fast-glob replace with tinyglobby to reduce the size of the pnpm CLI dependencies #9169.
pnpm deploy should not remove fields from the deployed package's package.json file #9215.
pnpm self-update should not read the pnpm settings from the package.json file in the current working directory.
Fix pnpm deploy creating a package.json without the imports and license field #9193.
pnpm update -i should list only packages that have newer versions #9206.
Fix a bug causing entries in the catalogs section of the pnpm-lock.yaml file to be removed when dedupe-peer-dependents=false on a filtered install. #9112

`v10.5.2`

Compare Source

Patch Changes

The pnpm config set command should change the global .npmrc file by default. This was a regression introduced by #9151 and shipped in pnpm v10.5.0.

`v10.5.1`

Compare Source

Patch Changes

Throw an error message if a pnpm-workspaces.yaml or pnpm-workspaces.yml file is found instead of a pnpm-workspace.yaml #9170.
Fix the update of pnpm-workspace.yaml by the pnpm approve-builds command #9168.
Normalize generated link paths in package.json #9163
Specifying overrides in pnpm-workspace.yaml should work.
pnpm dlx should ignore settings from the package.json file in the current working directory #9178.

`v10.5.0`

Compare Source

Minor Changes

Allow to set the "pnpm" settings from package.json via the pnpm-workspace.yaml file #9121.
Added support for automatically syncing files of injected workspace packages after pnpm run #9081. Use the sync-injected-deps-after-scripts setting to specify which scripts build the workspace package. This tells pnpm when syncing is needed. The setting should be defined in a .npmrc file at the root of the workspace. Example:
```
sync-injected-deps-after-scripts[]=compile
```
The packages field in pnpm-workspace.yaml became optional.

Patch Changes

pnpm link with no parameters should work as if --global is specified #9151.
Allow scope registry CLI option without --config. prefix such as --@scope:registry=https://scope.example.com/npm #9089.
pnpm link <path> should calculate relative path from the root of the workspace directory #9132.
Fix a bug causing catalog snapshots to be removed from the pnpm-lock.yaml file when using --fix-lockfile and --filter. #8639
Fix a bug causing catalog protocol dependencies to not re-resolve on a filtered install #8638.

`v10.4.1`

Compare Source

Patch Changes

Throws an error when the value provided by the --allow-build option overlaps with the pnpm.ignoredBuildDependencies list #9105.
Print pnpm's version after the execution time at the end of the console output.
Print warning about ignored builds of dependencies on repeat install #9106.
Setting init-package-manager should work.

`v10.4.0`

Compare Source

Minor Changes

pnpm approve-builds --global works now for allowing dependencies of globally installed packages to run postinstall scripts.
The pnpm add command now supports a new flag, --allow-build, which allows building the specified dependencies. For instance, if you want to install a package called bundle that has esbuild as a dependency and want to allow esbuild to run postinstall scripts, you can run:
```
pnpm --allow-build=esbuild add bundle
```
This will run esbuild's postinstall script and also add it to the pnpm.onlyBuiltDependencies field of package.json. So, esbuild will always be allowed to run its scripts in the future.

Related PR: #9086.
The pnpm init command adds a packageManager field with the current version of pnpm CLI #9069. To disable this behaviour, set the init-package-manager setting to false.

Patch Changes

pnpm approve-builds should work after two consecutive pnpm install runs #9083.
Fix instruction for updating pnpm with corepack #9101.
The pnpm version specified by packageManager cannot start with v.

`v10.3.0`

Compare Source

Minor Changes

Added a new setting called strict-dep-builds. When enabled, the installation will exit with a non-zero exit code if any dependencies have unreviewed build scripts (aka postinstall scripts) #9071.

Patch Changes

Fix a false negative of verify-deps-before-run after pnpm install --production|--no-optional #9019.
Print the warning about blocked installation scripts at the end of the installation output and make it more prominent.

`v10.2.1`

Compare Source

Patch Changes

Don't read a package from side-effects cache if it isn't allowed to be built #9042.
pnpm approve-builds should work, when executed from a subdirectory of a workspace #9042.
pnpm deploy --legacy should work without injected dependencies.
Add information about how to deploy without "injected dependencies" to the "pnpm deploy" error message.

`v10.2.0`

Compare Source

Minor Changes

Packages executed via pnpm dlx and pnpm create are allowed to be built (run postinstall scripts) by default.

If the packages executed by dlx or create have dependencies that have to be built, they should be listed via the --allow-build flag. For instance, if you want to run a package called bundle that has esbuild in dependencies and want to allow esbuild to run postinstall scripts, run:
```
pnpm --allow-build=esbuild dlx bundle
```
Related PR: #9026.

Patch Changes

Quote args for scripts with shell-quote to support new lines (on POSIX only) #8980.
Fix a bug in which pnpm deploy fails to read the correct projectId when the deploy source is the same as the workspace directory #9001.
Proxy settings should be respected, when resolving Git-hosted dependencies #6530.
Prevent overrides from adding invalid version ranges to peerDependencies by keeping the peerDependencies and overriding them with prod dependencies #8978.
Sort the package names in the "pnpm.onlyBuiltDependencies" list saved by pnpm approve-builds.

`v10.1.0`

Compare Source

Minor Changes

Added a new command for printing the list of dependencies with ignored build scripts: pnpm ignored-builds #8963.
Added a new command for approving dependencies for running scripts during installation: pnpm approve-builds #8963.
Added a new setting called optimistic-repeat-install. When enabled, a fast check will be performed before proceeding to installation. This way a repeat install or an install on a project with everything up-to-date becomes a lot faster. But some edge cases might arise, so we keep it disabled by default for now #8977.
Added a new field "pnpm.ignoredBuiltDependencies" for explicitly listing packages that should not be built. When a package is in the list, pnpm will not print an info message about that package not being built #8935.

Patch Changes

Verify that the package name is valid when executing the publish command.
When running pnpm install, the preprepare and postprepare scripts of the project should be executed #8989.
Allow workspace: and catalog: to be part of wider version range in peerDependencies.
pnpm deploy should inherit the pnpm object from the root package.json #8991.
Make sure that the deletion of a node_modules in a sub-project of a monorepo is detected as out-of-date #8959.
Fix infinite loop caused by lifecycle scripts using pnpm to execute other scripts during pnpm install with verify-deps-before-run=install #8954.
Replace strip-ansi with the built-in util.stripVTControlCharacters #9009.
Do not print patched dependencies as ignored dependencies that require a build #8952.

`v10.0.0`

Compare Source

Major Changes

Lifecycle scripts of dependencies are not executed during installation by default! This is a breaking change aimed at increasing security. In order to allow lifecycle scripts of specific dependencies, they should be listed in the pnpm.onlyBuiltDependencies field of package.json #8897. For example:
```
{
  "pnpm": {
    "onlyBuiltDependencies": ["fsevents"]
  }
}
```
pnpm link behavior updated:

The pnpm link command now adds overrides to the root package.json.
- In a workspace: The override is added to the root of the workspace, linking the dependency to all projects in the workspace.
- Global linking: To link a package globally, run pnpm link from the package’s directory. Previously, you needed to use pnpm link -g. Related PR: #8653
Secure hashing with SHA256:

Various hashing algorithms have been updated to SHA256 for enhanced security and consistency:
- Long paths inside node_modules/.pnpm are now hashed with SHA256.
- Long peer dependency hashes in the lockfile now use SHA256 instead of MD5. (This affects very few users since these are only used for long keys.)
- The hash stored in the packageExtensionsChecksum field of pnpm-lock.yaml is now SHA256.
- The side effects cache keys now use SHA256.
- The pnpmfile checksum in the lockfile now uses SHA256 (#8530).
Configuration updates:
- manage-package-manager-versions: enabled by default. pnpm now manages its own version based on the packageManager field in package.json by default.
- public-hoist-pattern: nothing is hoisted by default. Packages containing eslint or prettier in their name are no longer hoisted to the root of node_modules. Related Issue: #8378
- Upgraded @yarnpkg/extensions to v2.0.3. This may alter your lockfile.
- virtual-store-dir-max-length: the default value on Windows has been reduced to 60 characters.
- Reduced environment variables for scripts: During script execution, fewer npm_package_* environment variables are set. Only name, version, bin, engines, and config remain. Related Issue: #8552
- All dependencies are now installed even if NODE_ENV=production. Related Issue: #8827
Changes to the global store:
- Store version bumped to v10.
- Some registries allow identical content to be published under different package names or versions. To accommodate this, index files in the store are now stored using both the content hash and package identifier.
  
  This approach ensures that we can:
  1. Validate that the integrity in the lockfile corresponds to the correct package, which might not be the case after a poorly resolved Git conflict.
  2. Allow the same content to be referenced by different packages or different versions of the same package. Related PR: #8510 Related Issue: #8204
- More efficient side effects indexing. The structure of index files in the store has changed. Side effects are now tracked more efficiently by listing only file differences rather than all files. Related PR: #8636
- A new index directory stores package content mappings. Previously, these files were in files.
Other breaking changes:
- The # character is now escaped in directory names within node_modules/.pnpm. Related PR: #8557
- Running pnpm add --global pnpm or pnpm add --global @pnpm/exe now fails with an error message, directing you to use pnpm self-update instead. Related PR: #8728
- Dependencies added via a URL now record the final resolved URL in the lockfile, ensuring that any redirects are fully captured. Related Issue: #8833
- The pnpm deploy command now only works in workspaces that have inject-workspace-packages=true. This limitation is introduced to allow us to create a proper lockfile for the deployed project using the workspace lockfile.
- Removed conversion from lockfile v6 to v9. If you need v6-to-v9 conversion, use pnpm CLI v9.
- pnpm test now passes all parameters after the test keyword directly to the underlying script. This matches the behavior of pnpm run test. Previously you needed to use the -- prefix. Related PR: #8619
node-gyp updated to version 11.
pnpm deploy now tries creating a dedicated lockfile from a shared lockfile for deployment. It will fallback to deployment without a lockfile if there is no shared lockfile or force-legacy-deploy is set to true.

Minor Changes

Added support for a new type of dependencies called "configurational dependencies". These dependencies are installed before all the other types of dependencies (before "dependencies", "devDependencies", "optionalDependencies").

Configurational dependencies cannot have dependencies of their own or lifecycle scripts. They should be added using exact version and the integrity checksum. Example:
```
{
  "pnpm": {
    "configDependencies": {
      "my-configs": "1.0.0+sha512-30iZtAPgz+LTIYoeivqYo853f02jBYSd5uGnGpkFV0M3xOt9aN73erkgYAmZU43x4VfqcnLxW9Kpg3R5LC4YYw=="
    }
  }
}
```
Related RFC: #8. Related PR: #8915.
New settings:
- New verify-deps-before-run setting. This setting controls how pnpm checks node_modules before running scripts:
  - install: Automatically run pnpm install if node_modules is outdated.
  - warn: Print a warning if node_modules is outdated.
  - prompt: Prompt the user to confirm running pnpm install if node_modules is outdated.
  - error: Throw an error if node_modules is outdated.
  - false: Disable dependency checks. Related Issue: #8585
- New inject-workspace-packages setting enables hard-linking all local workspace dependencies instead of symlinking them. Previously, this could be achieved using dependenciesMeta[].injected, which remains supported. Related PR: #8836
Faster repeat installs:

On repeated installs, pnpm performs a quick check to ensure node_modules is up to date. Related PR: #8838
pnpm add integrates with default workspace catalog:

When adding a dependency, pnpm add checks the default workspace catalog. If the dependency and version requirement match the catalog, pnpm add uses the catalog: protocol. Without a specified version, it matches the catalog’s version. If it doesn’t match, it falls back to standard behavior. Related Issue: #8640
pnpm dlx now resolves packages to their exact versions and uses these exact versions for cache keys. This ensures pnpm dlx always installs the latest requested packages. Related PR: #8811
No node_modules validation on certain commands. Commands that should not modify node_modules (e.g., pnpm install --lockfile-only) no longer validate or purge node_modules. Related PR: #8657

`v9.15.9`: pnpm 9.15.9

Compare Source

Patch Changes

Fix running pnpm CLI from pnpm CLI on Windows when the CLI is bundled to an executable #8971.

Platinum Sponsors

Gold Sponsors

`v9.15.8`: pnpm 9.15.8

Compare Source

Patch Changes

pnpm self-update should always update the version in the packageManager field of package.json.
The pnpm CLI process should not stay hanging, when --silent reporting is used.
When --loglevel is set to error, don't show installation summary, execution time, and big tarball download progress.
Don't show info output when --loglevel=error is used.

Platinum Sponsors

Gold Sponsors

`v9.15.7`: pnpm 9.15.7

Compare Source

Patch Changes

pnpm self-update should not leave a directory with a broken pnpm installation if the installation fails.
Allow scope registry CLI option without --config. prefix such as --@scope:registry=https://scope.example.com/npm #9089.
pnpm self-update should not read the pnpm settings from the package.json file in the current working directory.
pnpm update -i should list only packages that have newer versions #9206.
Fix a bug causing entries in the catalogs section of the pnpm-lock.yaml file to be removed when dedupe-peer-dependents=false on a filtered install. #9112

Platinum Sponsors

Gold Sponsors

`v9.15.6`: pnpm 9.15.6

Compare Source

Patch Changes

Fix instruction for updating pnpm with corepack #9101.
Print pnpm's version after the execution time at the end of the console output.
The pnpm version specified by packageManager cannot start with v.
Fix a bug causing catalog snapshots to be removed from the pnpm-lock.yaml file when using --fix-lockfile and --filter. #8639
Fix a bug causing catalog protocol dependencies to not re-resolve on a filtered install #8638.

`v9.15.5`: pnpm 9.15.5

Compare Source

Patch Changes

Verify that the package name is valid when executing the publish command.
When running pnpm install, the preprepare and postprepare scripts of the project should be executed #8989.
Quote args for scripts with shell-quote to support new lines (on POSIX only) #8980.
Proxy settings should be respected, when resolving Git-hosted dependencies #6530.
Replace strip-ansi with the built-in util.stripVTControlCharacters #9009.