Thomas Haukland

- Hey! Did you customize the qmk code? I have some code to avoid ghosting, snd I think specifically those combnations Are part of it... does it happen if you...

Okay, i assumed you were using v2. I will make an attempt to backport a fw fix for this for v1 during the weekend.

Hey, sorry for the delay, could you check if this fixes your problem: https://github.com/tompi/qmk_firmware/commit/bad9c6d3639c779faf75e22ab21cb0a0988282e3 If so I will update the vial fw and the v1 releases

Hey, I know the headers can be a very tight fit, sorry about this...(in fact there is an open issue for this: https://github.com/tompi/cheapino/issues/29 ), but were you unable to push...

I would very much welcome a pull request, otherwise Ill put in an explicit warning about the pin headers. Feel free to suggest other links as well. I have used...

Hi, yeah, two keys, because you are bypassing the diodes in place for this. No wonder you are having a hard time, I always struggle myself when I revisit this...

Basically the order of the rj45 cable wires is reversed when passing between the boards. Fixed in qmk mapping, but is wrong on the schematics(and to a certain degree, it...

This will be handled by #42

Hi! There is enough free pins to drive an OLED, the problem is more mechanical, there are no through holes to mount it in... If you make(3D print?) some sort...

Sorry, I think this is gonna be difficult with the std oleds because of the height of the rj45 socket.