Brett Walach

It appears to be copypasta from the Photon Docs. Photon says: >The easiest way to connect your device to Wi-Fi is using the mobile app as described in the previous...

@mohitbhoite bump :)

A good idea for wire coloring might just be to make them all black, and point out the switched side is HOT. > Another color issue on the Relay Shield...

When I edit the main post such as right now, I will add a new comment here for visibility. I'm also updating all datasheets to point back to this known...

Just changed this info in the P1 Datasheet Errata (SETUP -> RESET). From: ``` Pinout image 3, SETUP button pin is 34 (MICRO_RST_N), not 26. ``` To: ``` Pinout image...

Add electrical specification note for Photon/P1/Electron: ``` DAC output limits: min resistive load is 5k ohms, and max capacitive load is 50pF. ```

Electron Datasheet Block Diagram error. > Rework block diagram to remove the dot-junction for VUSB and STM32F205, they are not connected. Only the two data lines are connected. https://docs.particle.io/datasheets/electron-datasheet/#block-diagram

Changed requirement for update to BT COEX pins section: > Update BT COEX section with link to example of how to control as GPIO, or add a note as note...

Added an Electron Datasheet v003 list (some carried over from v002) - How to power the Electron without a battery. - Describe the usage of the VBAT to 3V3 bridge...

Added more info to: - Describe the usage of the VBAT to 3V3 bridge on the bottom.