Stijn Tintel

See https://github.com/HeyWillow/willow/discussions/389#discussioncomment-13578415

This is documented in the README. See #110. If you want to see it fixed, please report the issue to openHAB.

Maybe we can print a message in Willow Web Flash to instruct the user to power-cycle the device after flashing?

> Maybe we can print a message in Willow Web Flash to instruct the user to power-cycle the device after flashing? Hah, looks like there's a PR open for that...

We had another report of no or very low volume after initial flash, and another confirmation a power-cycle fixed it. I've merged the PR to Willow Web Flash that instructs...

This adds a new container for coqui TTS, with various fixes. Chatbot support is removed, as this is not a focus area for Willow. Python flake8 check is replaced with...

I'm transferring this issue to the Willow repository, as the error you've posted is from Willow. I created a new issue in the Willow Web Flash repo to allow UTF-8...

The failure to open the JSON file is not the issue here. It will not exist after flashing Willow via Willow Web Flash. Willow will fetch this file from WAS,...

Should be relatively easy to hook this up in the ESP Audio callback: https://github.com/HeyWillow/willow/blob/main/main/audio.c#L88-L94 And we could unconditionally send wake_start/wake_end, end instead if guard handling the wake_result response if One...

I suspect this is introduced by 2fa6c6c413897757da054f7447b4e8e451d6b87b. Reverting 20780c45c614aaba985409f6a266b81e0ab89ce3 fixes it, but then #319 is a problem again.