stefanbode

I checked the current release version (`STATUS2 = {"StatusFWR":{"Version":"12.3.1(tasmota)","BuildDateTime":"2022-12-16T10:28:16"`) with this settings: `14:13:24.670 MQT: stat/roleta_w_pokoju_lewa/STATUS13 = {"StatusSHT":{"SHT0":{"Relay1":1,"Relay2":2,"Open":310,"Close":290,"50perc":61,"Delay":0,"Opt":"0000","Calib":[1370,483,3223,900,1000],"Mode":"1"}}}` and everything is working no problems here.

@arendst : If the interlock is missing on shuttermode 1 i send a ERROR message to the logs. Maybe it is required to pop a message on the WEBPAGE. I...

Gentlemen please can you set Shutterrelay1 1 and send the log files. We have to find out what wrong there and need logs

ok fine. I do see` domoticz/in`. This let me assume you use the buttons in domoticz to control your shutter. Can you please login to the webpage of the shutter...

from the shutterdriver perspective all the above logs look ok. No reason why it should not work.

I assume that not the limited decimals are the problem, but that on midnight when storing the daily consumption into total there is a jump.

I was able to find this also on my devices but only on the ones with super low power consumption. If there s e.g. 50w, you see nothing. 

I am pretty sure the digit detection already does a very good job. We just need an implementation of the "-" and the ability to convert the number to a...

Currently not, but the idea is great. I have an Echo, too. Therefore testing is no problem. I would assume to use the dimmer value für the shutter. This might...

For me it looks like currently the hue does not support dimming. Just of off as far as I can see in the code of the wemos/hue