spock
spock copied to clipboard
spockframework
where block cannot access or declare variables?
Originally reported on Google Code with ID 15
i would expect to be able to do this:
def "my test"() {
given:
def a = new Apple()
def o = new Orange()
when:
fruit = f
then:
<something>
where:
f << [a, o, a, o, a, o]
}
But I get MissingPropertyException for a & o. I also tried declaring a & o in the
where block - same issue. Declaring them outside the
scope of the method works but is not ideal. I ended up unrolling the where into several
when/then blocks.
I see that the documentation for the where block is coming (at light speed :) so maybe
this is as designed.
Thanks
Reported by jacobsonz on 2009-03-12 18:07:08
In your concrete example, you could do:
where:
f << [new Apple(), new Orange(), ...]
You could also call out to factory methods like this:
f << [createApple(), createOrange(), ...]
Note that such factory methods may only access @Shared and static fields of the
specification class (but no instance fields).
Is any of these options a good solution for your use case, or would you prefer to do
something like the following?
where:
def a = new Apple()
def b = new Orange()
f << [a, o, a, o, a, o]
Reported by pniederw on 2009-03-12 18:44:27
- Labels added: Type-Enhancement
- Labels removed: Type-Defect
I think the last option is the best because the actual test we were writing was more
like:
f << [[a, o, a], [a, a, a], [a,o], [o,o,o], [a]]
and it would be silly to keep instantiating.
Reported by jacobsonz on 2009-03-12 22:32:25
I understand your point. On the other hand, encouraging the reuse of objects in such
a way goes somewhat
against the current design, which tries to isolate iterations as much as possible from
each other. For example,
setup()/cleanup() is called before/after every iteration. And, unless your objects
are heavy-weight, recreating
them is no significant overhead. I will have to think about this.
Currently, you can achieve your goal as follows:
@Speck
class MySpeck {
@Shared a = new Apple()
@Shared o = new Orange()
def "my test"() {
// ...
where:
f << [[a, o, a], [a, a, a], [a,o], [o,o,o], [a]]
}
}
The downside is that a and o are in a sense defined in the wrong scope and could be
used by other feature
methods as well.
Reported by pniederw on 2009-03-12 23:11:19
Here is another way:
where:
f << {
def a = new Apple()
def o = new Orange()
[[a, o, a], [a, a, a], [a,o], [o,o,o], [a]]
}()
Reported by pniederw on 2009-03-19 21:12:54
That's a nice solution. I like it. Thanks!
Reported by jacobsonz on 2009-03-19 23:25:44
For now I've decided not to add support for variable definitions in where-blocks, unless
a compelling use-case
comes along.
Reported by pniederw on 2009-03-30 01:12:29
- Status changed:
WontFix
It has happened to me multiple times now that I've run into a similar issue and I would very much appreciate if it would at least be possible to access instance variables of the specification from the where block. Consider for example the following test case (which doesn't compile):
class NotSupportedSpec extends Specification {
Consumer<Integer> userDeleteListener = Mock()
def userManager = new UserManager()
def userId1 = userManager.addUser("romeo", "street 1", "+13212342")
def userId2 = userManager.addUser("julia", "street 2", "+43212322")
def setup() {
userManager.addDeleteListener(userDeleteListener)
}
def deleteTest() {
when:
userManager.deleteUser(userId)
then:
1 * userDeleteListener.accept(_)
!userManager.userExists(userId)
where:
userId | _
userId1 | _
userId2 | _
}
// more tests that build on userId1, userId2 and userDeleteListener (possibly with where blocks)
}
Note that I cannot annotate userManager with @Shared because then I could not register the listener anymore (which is a mock object). I could of course unroll the deleteTest but I don't think that this is satisfactory. Also it would of course be possible to register the listener in the test and annotate the userManager with @Shared. But assume that some other methods must be called in setup() after the listener has been registered...
I was just bitten by this as well, so please use as another datapoint. I was roughly trying to do the following:
where:
def sep = File.separator
path | startsWithPath || result
"" | "" || true
"a${sep}a${sep}a" | "a${sep}b" || false
"a${sep}a" | "a${sep}a" || true
"a${sep}a${sep}a" | "a${sep}a" || true
"a${sep}ab" | "a${sep}a" || false
@craffael If generally making these fields @Shared would work for you, you could make them shared, and instead of having a setup method have a method called differently and and call that helper method from inside your test. Or if the listener could also be shared, you could use setupSpec instead of setup. Or you could define userManager, userId1 and userId2 inside the where block and then have a helper method with userManager as parameter that prepares the user manager as you need it.
@tjni Just remove the def and it works.
The minor downside (or upside, depends on point of view) is, that sep will then also be available in the actual test code.
You can define calculated data variables, even calculating the value from previously defined data variables, just not local variables that are only available in the where block.
@craffael actually I had a similar problem right now and found an even groovier solution. Use the dynamic field resolution of Groovy. Here your code modified to clarify what I mean:
class SupportedSpec extends Specification {
Consumer<Integer> userDeleteListener = Mock()
def userManager = new UserManager()
def userId1 = userManager.addUser("romeo", "street 1", "+13212342")
def userId2 = userManager.addUser("julia", "street 2", "+43212322")
def setup() {
userManager.addDeleteListener(userDeleteListener)
}
def deleteTest() {
when:
userManager.deleteUser(this."$userId")
then:
1 * userDeleteListener.accept(_)
!userManager.userExists(this."$userId")
where:
userId | _
'userId1' | _
'userId2' | _
}
// more tests that build on userId1, userId2 and userDeleteListener (possibly with where blocks)
}
Or if you like it better:
class SupportedSpec extends Specification {
Consumer<Integer> userDeleteListener = Mock()
def userManager = new UserManager()
def userId1 = userManager.addUser("romeo", "street 1", "+13212342")
def userId2 = userManager.addUser("julia", "street 2", "+43212322")
def setup() {
userManager.addDeleteListener(userDeleteListener)
}
def deleteTest() {
given:
userId = this."$userId"
when:
userManager.deleteUser(userId)
then:
1 * userDeleteListener.accept(_)
!userManager.userExists(userId)
where:
userId | _
'userId1' | _
'userId2' | _
}
// more tests that build on userId1, userId2 and userDeleteListener (possibly with where blocks)
}
@Vampire Thanks for the tip with dynamic field resolution, that's actually a workable workaround :)
this really hurts readability. I have a test where I want to test some date ranges. I would have liked to do this:
//put this anywhere in the spec
Date longAgo = new Date(System.currentTimeMillis() - 86_400_000_000L)
Date moreRecent = new Date(System.currentTimeMillis() - 86_400_000L)
Date now = new Date()
where:
p1 | p2 | since | until || expect
v1 | v2 | longAgo | now || foo
v2 | v3 | longAgo | moreRecent || bar
v3 | v4 | moreRecent | now || baz
But I have to include those long instantiations everywhere, or create methods that return them.
@chochos you can access @Shared/static fields in where: blocks https://spockframework.org/spock/docs/2.0/all_in_one.html#_sharing_of_objects_between_iterations
@Vampire can you expand on your reply to https://github.com/spockframework/spock/issues/138#issuecomment-392134746 above? You said "Just remove the def and it works", but I tried modifying @tjni's example as follows:
where:
sep = "."
path | startsWithPath || result
"" | "" || true
"a${sep}a${sep}a" | "a${sep}b" || false
"a${sep}a" | "a${sep}a" || true
"a${sep}a${sep}a" | "a${sep}a" || true
"a${sep}ab" | "a${sep}a" || false
and in 2.1 it gave me groovy.lang.MissingPropertyException: No such property: sep for class: MyTestClass. (In 1.3 I got java.lang.NullPointerException: Cannot invoke method getAt() on null object instead, at the same line number.)
I'm trying to something similar in my own code, e.g.:
expected = 'Expected'
maps << [
[[VAR: expected]],
[[OTHER: 'Unexpected', VAR: expected]],
[[:], [VAR: expected]],
[[VAR: expected], [:]],
[[VAR: expected], [VAR: 'Unexpected']],
]
and I'm also getting that error as well.
Sorry for the late answer @wisnij. I think in 1.3 it should have worked iirc, but since 2.0 it will not anymore due to various quirks and problems it caused and various cases that did not work anyway as you can read in the 2.0 migration guide: https://spockframework.org/spock/docs/2.3/all_in_one.html#_no_access_to_data_variables_in_data_pipes_anymore_2
As @leonard84 mentioned, you can declare expected as @Shared or static (if it is a constant) field and then access it in the where block.
@leonard84 maybe now that we forbid to access other data variables it might be time to actually reopen this issue and finally allow local variables in the where block? What do you think?
@Vampire if you want to tackle that, you can give it a try.
I think that they would basically behave like scoped constants that are available only to the where block. Furthermore, to make it less confusing I would say you can only declare them as first expressions of a where block. Maybe we should require final instead of def to make it clear that they won't be reassigned.
where:
final sep = "."
path | startsWithPath || result
"" | "" || true
"a${sep}a${sep}a" | "a${sep}b" || false
"a${sep}a" | "a${sep}a" || true
The following would be illegal:
where:
a | b
1 | 2
final c = a + b
d << [c, c]
