nRF52832_Breakout
nRF52832_Breakout copied to clipboard
sparkfun
Breakout board for the Nordic nRF52832, a BLE/ANT/2.4GHz, Cortex-M4F SoC.
The only change in the DFU firmware was made at the source of the clock for the SoftDevice application, from XTAL (32.768 kHz) to internal RC. With the original, custom...
Customer states via forums: **It appears that there is a setting for reading analog voltages missing or needs to be added. Trying to read 0 to 3 volts on an...
I think the ground connection of the impedance matching capacitor closest to the nRF should the other way around. According to Nordic, the cap's ground should be connected only to...
Hi, Can you please confirm the command to flash the bootloader to sparkfun nrf52 breakout board? I am trying to generate a zip of bootloader and softdevice using the following...
https://puu.sh/vMOZJ/848d226294.png Values says 6 pico farat but description says 15 PF with a tollerance of 0.5% id like to know what to use .. i dont want to reflow both...
I followed the exact steps mention to compile the bootloader. I also installed **GnuMake**. I am using **8 2018-q4-major** version as _ARM GCC ToolChain_. Platform: _Windows 10_ _PATH_ variables are...
Hey guys, the internal reference of my Sparkfun Break out seams to be 0.6V on the Analog input. I need to change the gain setting to round about 3.3V. Is...
