Facet hung issuing corrections to Rtk2go and Emlid simultaneously

[amlago]

Facet hung issuing corrections to Rtk2go and Emlid simultaneously

facet v4.1 06/14/24 I was working today with Facet in base mode for a little over 5 hours, issuing corrections to Rtk2go and Emlid at the same time. I also saved the ubx file on the SD card and when that period of 5 hours of work more or less arrived, it crashed. It stopped issuing corrections, the screen remained frozen with a fixed rtcm number without advancing. It didn't turn off normally and I had to hold the power button for 20 seconds and it turned off. Could it be a ram problem due to the double emission and saving of the ubx file on the SD card? The Wi-Fi in the work area is excellent and the battery was over 60 percent. I leave the problem to your analysis. greetings