PointPerfect L-band keys missing at power on with Custom Thingstream device profile token

[edgecase14]

Subject of the issue

Using custom hardware based on SparkFun ESP32, firmware v3.5 and v3.7, you must go to PointPerfect setup, Disable PP, Enable PP, then exit, now L-band corrections work.

Your workbench

• What version of RTK firmware are you running? 3.5 or 3.7
• What radios are you using: Bluetooth, WiFi, and/or ESP-Now? Bluetooth serial terminal.
• Are there any additional details that may help us help you?

Steps to reproduce

Power on. bluetooth serial terminal, enter +++ to get setup menus. Choose s - it displays L-band Online, no keys. eXit, go to PointPerfect setup, choose 1) disable, then 1) enable. exit, go to setup (s) it displays L-band Online, keys valid. After a minute or two, RTK Fixed is achieved.

Expected behavior

Keys should be available at bootup, without using bluetooth serial terminal.

Actual behavior

No PP corrections will happen without manual intervention.

[nseidle]

Hi edgecase14 - Sorry this isn't working for you! We're focused on the 'L-Band through SparkFun' path. If you would like to take a run at fixing it, I would welcome the PR.

[edgecase14]

PR sounds great, that way I don't have to maintain a fork (yet).

[PaulZC]

I believe we've fixed this. I'm able to get keys and corrections from power-on using a custom device token with the latest Release Candidate firmware. Closing...

Best wishes, Paul