svxreflector: status page not working

[marcels1990]

hello,

i have 2 working svxreflectors running on a virtual machine on debian without problems. I was installing a svxreflector for another ham group on a raspberry and they wanted to access the status page (http://IP_REFLECTOR:8080/status). But the raspberry the page is not working, using netstat i only see the port 5300 open. On my other reflector the page is working without problems. I tried to change the port number on the config file of the reflector but without success. Can you give me some advice please?

thank you very much

[f5vmr]

I use 8080 for another machine on my network. I also run svxportal in the web server, I have forced the port to 8181, and port-forwarded this to the external address. I clearly see the json content of all the connected stations. I also run the reflector and the portal on a VM, and I use a external address to access both the portal and the web server.

On Fri, 12 Jan 2024 at 21:21, marcels1990 @.***> wrote:

hello,

i have 2 working svxreflectors running on a virtual machine on debian without problems. I was installing a svxreflector for another ham group on a raspberry and they wanted to access the status page ( http://IP_REFLECTOR:8080/status). But the raspberry the page is not working, using netstat i only see the port 5300 open. On my other reflector the page is working without problems. I tried to change the port number on the config file of the reflector but without success. Can you give me some advice please?

thank you very much

— Reply to this email directly, view it on GitHub https://github.com/sm0svx/svxlink/issues/659, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACAKA5GHVYKFC6FXWHWQIFLYOGSMLAVCNFSM6AAAAABBYXD5WWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA3TSNZUGE2TMMI . You are receiving this because you are subscribed to this thread.Message ID: @.***>

[marcels1990]

Ok thank you. Can you give me some advice on the raspberry? I have do not have an idea why the port does not come up.Thank youAm 12.01.2024 23:14 schrieb Chris G4NAB_F5VMR @.***>: I use 8080 for another machine on my network. I also run svxportal in the

web server, I have forced the port to 8181, and port-forwarded this to the

external address. I clearly see the json content of all the connected

stations. I also run the reflector and the portal on a VM, and I use a

external address to access both the portal and the web server.

On Fri, 12 Jan 2024 at 21:21, marcels1990 @.***> wrote:

hello,

i have 2 working svxreflectors running on a virtual machine on debian

without problems. I was installing a svxreflector for another ham group on

a raspberry and they wanted to access the status page (

http://IP_REFLECTOR:8080/status). But the raspberry the page is not

working, using netstat i only see the port 5300 open. On my other reflector

the page is working without problems.

I tried to change the port number on the config file of the reflector but

without success. Can you give me some advice please?

thank you very much

—

Reply to this email directly, view it on GitHub

https://github.com/sm0svx/svxlink/issues/659, or unsubscribe

https://github.com/notifications/unsubscribe-auth/ACAKA5GHVYKFC6FXWHWQIFLYOGSMLAVCNFSM6AAAAABBYXD5WWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA3TSNZUGE2TMMI

.

You are receiving this because you are subscribed to this thread.Message

ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

[f5vmr]

All I can suggest that on the router to which you connect the raspberry, that you port-forward 8080 from the internal to the external address. I do a lot of port redirection on my devices, as I run a dmr dashboard too, as well as my own web page. Quite frankly, (franchement) I do not use the 8080 capability because of the user of svxportal, even though I have redirected to 8181 instead. (See svxportal-uk.ddns.net:81 as an example). For more information on this, go to github.com/sa2blv . 73 Chris On Fri, 12 Jan 2024 at 22:21, marcels1990 @.***> wrote:

Ok thank you. Can you give me some advice on the raspberry? I have do not have an idea why the port does not come up.Thank youAm 12.01.2024 23:14 schrieb Chris G4NAB_F5VMR @.***>: I use 8080 for another machine on my network. I also run svxportal in the

web server, I have forced the port to 8181, and port-forwarded this to the

external address. I clearly see the json content of all the connected

stations. I also run the reflector and the portal on a VM, and I use a

external address to access both the portal and the web server.

On Fri, 12 Jan 2024 at 21:21, marcels1990 @.***> wrote:

hello,

i have 2 working svxreflectors running on a virtual machine on debian

without problems. I was installing a svxreflector for another ham group on

a raspberry and they wanted to access the status page (

http://IP_REFLECTOR:8080/status). But the raspberry the page is not

working, using netstat i only see the port 5300 open. On my other reflector

the page is working without problems.

I tried to change the port number on the config file of the reflector but

without success. Can you give me some advice please?

thank you very much

—

Reply to this email directly, view it on GitHub

https://github.com/sm0svx/svxlink/issues/659, or unsubscribe

< https://github.com/notifications/unsubscribe-auth/ACAKA5GHVYKFC6FXWHWQIFLYOGSMLAVCNFSM6AAAAABBYXD5WWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA3TSNZUGE2TMMI

.

You are receiving this because you are subscribed to this thread.Message

ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/sm0svx/svxlink/issues/659#issuecomment-1890059108, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACAKA5DWHWD2O6UWF32TPZ3YOGZPJAVCNFSM6AAAAABBYXD5WWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJQGA2TSMJQHA . You are receiving this because you commented.Message ID: @.***>