Robert James Hernandez

Setting the MTU on the tunnel to 1480 seems to help (1 less error). But Im still seeing 1 remaining error:  

Thanks @BerkhanBerkdemir this looks like a great list to start with

@BerkhanBerkdemir thanks for checking back in and no worries about not being able to make the work party. I think setting a goal of December sounds like a good idea....

clearing browser cache seems to have fixed the last issue.  But restarting the browser it looks like the `Test for Dual Stack DNS and large packet` is timing out...

Adding some notes here about dhcpv6: There seem to be more than one way to set NTP servers via DHCPv6: https://superuser.com/a/1766773 which calls out RFC 5908: https://www.rfc-editor.org/rfc/rfc5908.html#section-7 Kea only seems...

Example `/tmp/udhcpc.params`: [udhcpc.params.txt](https://github.com/socallinuxexpo/scale-network/files/13932850/udhcpc.params.txt)

We should key on `e8450-ubi` in board.json: ``` ~# cat /etc/board.json | jq -r . { "model": { "id": "linksys,e8450-ubi", "name": "Linksys E8450 (UBI)" }, "led": { "wan": { "name":...

@kylerisse has already done some work previously on this. Im going to assign the issue to him and have him put in a PR accordingly. Its not anything terribly difficult...

Additional info was recently added to the openwrt wiki regarding BSS coloring: https://openwrt.org/toh/linksys/e8450#beam_forming_and_enable_basic_service_set_bss_coloring

yes its on the same page