Rene

Hi Mobigroup, This should not be the case. The web interface is independent of the camera initialization. If this persists, try to erase the flash and reflash the firmware to...

Hi Mobigroup, I will take a look at it...

I checked it and there are different versions of the ESP32_CAM, each model is different. See http://www.ai-thinker.com/pro_view-24.html. This is an ESP32 cam module from AI-Thinker. This explains why you need...

I also have one of those and it matched with the settings for the AI-Thinker. So I assume this is an AI-Thinker. See also: https://randomnerdtutorials.com/esp32-cam-ai-thinker-pinout/

Maybe the best thing is to document the boards, a picture and how they look, and provide multiple build settings. This because there are also boards (like the Seeed Studio...

Hi Curie / Joba, Disconnects are often caused by loss of connectivity or too much data going over the RTSP stream so the ESP cannot handle it anymore. Also, if...

OTA has been taken out in the **develop** branch this might increase performance... Could you try to see if the esp32S3-eye board is still working correctly with the new easy...

Think this is a bit out of scope for the ESP32CAM. Yes, one could add a I2S mems microphone but is already having difficulties streaming.

Hi, This should be possible; multiple sockets are accepted... However, think this does not work because of lack of CPU...

Oh, and yes, having both image and sound would be great. Some boards do have an onboard mems microphone... Will look into this...