ArduinoWeatherOS

ArduinoWeatherOS copied to clipboard

WGR800 error - wind speeds >10m/s

7

Hi, I've noted that wind speed never goes above 36km/h (10m/s) yet when I look on the OS consol during high winds it does. The speeds match up exactly to...

jrhilton

Anenometer only

14

Hi Excellent well documented project. I only have the anenometer and want to capture the data from that. I cannot seem to get any serial data from it using your...

pdbayes

negative temperature - THGR810

2

Hello, I've done some test with thgr810 (humidity and temperature sensor using oregon v3 protocol) that i've put in my freezer (in order to reach the low battery level). With...

micg77

battery level

3

Hello, thanks a lot for your program. I have found where the battery level is fixed : it is the 3rd bite of nyble 8. If you add battery_level =...

micg77

Rain calculation

2

Hi Rob, I agree with afeno, this is an excellent project and perfectly documented :) I would like to add my experience to your project. I did some vigorous testing...

Hserfontein

Where is write CSV file ?

9

Hello Rob, Nice Work You done ! I put your soft on my arduino, and a 433 recivere and my led on pin13. I can saw my led blinking, and...

deennoo

433Mhz Receiver

2

Hello, This is an excellent project and perfectly documented :) I'm very excited to try to replicate what you have accomplished! My main doubt is regarding the **433Mhz Receiver board**...

afeno

  Attached Graphics

robwlakes