Robert Carson

@v-dobrev thanks for putting this together. I'm looking forward to testing this out within my workflow and getting an idea how much this can reduce my initial start-up costs for...

@wcdawn either using glvis or some other visualization software could you plot the element attributes for the mesh that works and the one that doesn't. I'm wondering if the attributes...

You know looking at the below, and seeing where the process boundaries are based on the black squiggly lines of the below image. It almost looks like all the diffuse...

So, I've recently been able to run a largish crystal plasticity problem (64x64x64 C3D8 type elements) out to 1.2% strain to test machinery of everything. I found while working on...

It might be easier to discuss this over the phone, but I've included at least a few thoughts on your comments. I feel the time dependent BCs should be able...

I was surprised by that fact as well, especially since we're essentially looking at a linear elastic problem during the 1st time step. I guess I left this out in...

I have seen the surrogate problem work pretty well in other crystal plasticity fem codes I've worked on. They usually use it as a way to find a good guess...

I've been recently examining ways of speeding up the code. Since the linear solver is where 90% of our time is being spent, I've been looking at ways to speed...

I just came across Issue #619, and it more or less sounds like I won't be able to really take advantage of using Hypre on the GPU until at least...

Thanks @tzanio for the info. I'll have to pass this info onto the ExaAM team as well as I'm not too sure how many are aware of this fact. Also...