connectedhomeip
connectedhomeip copied to clipboard
project-chip
[Platform] linux
Reproduction steps
Hi please share a list of all the python packages and versions used to build the example codes.
Platform
python, other
Platform Version(s)
No response
Type
Manually tested with SDK, Platform validated
(Optional) If manually tested please explain why this is only manually tested
No response
Anything else?
No response
An exact list may not be easily built. I would suggest to run a build that you need and then run pip list to fetch the list of installed packages.
I get an error related to psutils package, I tried every article out there but just cant get through the issue, Can you have a look at the log and revert back to me.
Building wheels for collected packages: mobly, psutil, pyperclip Building wheel for mobly (setup.py): started Building wheel for mobly (setup.py): finished with status 'done' Created wheel for mobly: filename=mobly-1.12.1-py3-none-any.whl size=160690 sha256=8f4af6380d5b45b0f351e92e186c332f878d1e0f192370a90e02c081a0404c6d Stored in directory: /root/.cache/pip/wheels/63/bb/6f/5332fa07292cfad692d273db4b9d6b140d50913113a03922bf Building wheel for psutil (pyproject.toml): started error: subprocess-exited-with-error
�× Building wheel for psutil (pyproject.toml) did not run successfully. �│ exit code: 1 �╰�─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip. Building wheel for psutil (pyproject.toml): finished with status 'error' ERROR: Failed building wheel for psutil Building wheel for pyperclip (setup.py): started Building wheel for pyperclip (setup.py): finished with status 'done' Created wheel for pyperclip: filename=pyperclip-1.9.0-py3-none-any.whl size=11002 sha256=5b8ccaf3cb807f548de558f1b977e1c4e07efaeb26324ff0caec6fe5f6eb687e Stored in directory: /root/.cache/pip/wheels/6d/a5/02/e801d8db207899213bc1e564f861696b03cb9598c2817b2b62 Successfully built mobly pyperclip Failed to build psutil ERROR: Could not build wheels for psutil, which is required to install pyproject.toml-based projects ninja: build stopped: subcommand failed. ['ninja', '-C', '/run/media/mmcblk1p1/edge3ConnectedIp/.environment/gn_out', '-v', ':python_packages.install']
Traceback (most recent call last): File "/run/media/mmcblk1p1/edge3ConnectedIp/third_party/pigweed/repo/pw_env_setup/py/pw_env_setup/virtualenv_setup/install.py", line 421, in install_packages subprocess.check_call(ninja_cmd, stdout=outs, stderr=outs) File "/usr/lib/python3.8/subprocess.py", line 364, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['ninja', '-C', '/run/media/mmcblk1p1/edge3ConnectedIp/.environment/gn_out', '-v', ':python_packages.install']' returned non-zero exit status 1.
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/run/media/mmcblk1p1/edge3ConnectedIp/third_party/pigweed/repo/pw_env_setup/py/pw_env_setup/env_setup.py", line 995, in
I don't seem to see the undelying error from the logs. Try a pip install psutil==5.9.4 and see if that fails out with a clearer error message.
Cant really find a fix for this, doesnt seem to work on the host board for yocto based distro.