Terminal mangled when attaching to existing console

[vvillenave]

Description

This is what I get when opening a console into a running wifibox image:

[root@arco ~]# wifibox console
Connecting, type "~." to leave the session...
Connected
root
wifibox:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:A0:98:8A:05:71  
          inet addr:10.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.0
          inet6 addr: fe80::2a0:98ff:fe8a:571/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4958 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6358 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:622405 (607.8 KiB)  TX bytes:6470642 (6.1 MiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 14:13:33:E2:9A:C3  
          inet addr:192.168.206.153  Bcast:192.168.206.255  Mask:255.255.255.0
          inet6 addr: 2a0d:e487:48f:eab0:1613:33ff:fee2:9ac3/64 Scope:Global
          inet6 addr: fe80::1613:33ff:fee2:9ac3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6370 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4975 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5888956 (5.6 MiB)  TX bytes:622590 (607.9 KiB)

wifibox:~# 

So far, so good. Now if I open another terminal and try to type the same command, here’s what I get:

[root@arco ~]# wifibox console
Connecting, type "~." to leave the session...
Stale lock on nmdm-wifibox.1B PID=2426... overriding.
Connected
ot
: ro fundox:~#foieh0   nk cpEtheret  HWad A0:::051  
    int 0.1:.0 k       et6 add fe:2:9f:fe8a:574copeL
       UROADCAST RUNNING MLTICAST :15etr:1
     RXackets:5123 r0 dvrns fr:0
    ets:63erro:pe0 orunrri:0
   ollison:0eu0 
      RX bs:0 4 KTbytes:65058 (6 MiB)
lo incap:Local Loop
  ndr:2..  55.0.0.0
     inet6 addr::/12cHt
     UP LOB RUNINT:653c:1
          pat:rop:0 vr0me:0        TXackets:rrors:0pd overrrier:0
                                                                    lio tqeee     RX bytes (0B  X s:0 (0

       it6add d:87f:ea61:33e23/4 e:Glo   netf80::1633ff:ee2:9ac3/ :n    UROADCAST RNIMT00 ri:1    s:6rpe0 overruns0 frame:0
      ket errs:0 dropped:0 overru:0 carer:0
    ollis0 txqeen:1000 
   yes926 (5.Mi) byt:65348 (iB)

wfibx:~#

Host operating system

FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64

Wireless NIC

MT7921 802.11ax PCI Express Wireless Network Adapter

Wifibox version

Output of `wifibox version`.  Note that only the latest version is supported.

Disk image type and version

wifibox-alpine, git rev e0471d89221a3340c449ca4e0ece15c5f6d6a82b

Changes to the default configuration files

No response

Logs

No relevant log AFAICS.

Additional context

No response

Have you tried to turn it on and off?

• [X] Yes, I have read all the manual pages first!

[pgj]

Thanks for reporting the issue! Personally, I could not reproduce this. On my 13.4 system, the second invocation to wifibox console gives a error.

# wifibox console
Connecting, type "~." to leave the session...
all ports busy
Finished.

Maybe that is something specific to FreeBSD 14 and later versions. I will have to investigate this further.

[pgj]

I could not reproduce this issue on a freshly installed 14.1-RELEASE system either.