igmpproxy
igmpproxy copied to clipboard
IGMP multicast routing daemon
According to RFC 2236, IGMPv2/v1 clients should ignore additional fields in query, but build the checksum over the whole IP-Packet. So this is designed for future compatibility and it should...
I need to configure my router as a downstream with igmpv3, currently igmpproxy builds igmp query membership message by: {code} static void buildIgmp(uint32_t src, uint32_t dst, int type, int code,...
I've been having issues where the IGMP Proxy service in pfSense crashes periodically. If I make any configuration change it comes back no problem, presumably because it simply restarts the...
请教,在openwrt5.4上安装igmpproxy,局域网内能正常播放组播流。但每隔4分钟左右就断流,需重新点击播放,反复如此。
when I run igmpproxy,it throws an error,what is the root cause? igmpproxy -d /usr/local/etc/igmpproxy.conf MRT_INIT failed; Errno(92): Protocol not available I build it on gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04 where...
Testing with Fresh Tomato 2021.2 K26ARM USB AIO-128K, which includes igmpproxy 0.3. Changelog: https://bitbucket.org/pedro311/freshtomato-arm/src/arm-master/CHANGELOG I watched the packet capture for about 10 minutes and noticed that the interval between **IGMPv2...
 This is the topology of my home-network.Igmpproxy was installed in the ROUTER to watch iptv in lan. Everything's fine functionally. But here comes a issue - Once I turn...
…e the same behavior. otherwise the igmp query time interval will be wrong. slow timer is not 125s or quick timer is no 31 sec
I have an KPN combined fibre internet/TV connection. It uses routed IPTV to provide tv service. As such I have IGMP snooping active on my two switches and configured igmpproxy...
Hello, I have a problem running igmpproxy with localhost programme using multicast : My ISP provides TV streams over multicast. So I used igmpproxy on my OpenWrt router to be...