[LIGHT] Blinking

[niqdev]

A user suggested to add the blinking feature to the light, like

*1*11*32## (on for 1 minute)
*1*12*32## (on for 2 minutes)
*1*13*32## (on for 3 minutes)
*1*14*32## (on for 4 minutes)
*1*15*32## (on for 5 minutes)
*1*16*32## (on for 15 minutes)
*1*17*32## (on for 30 seconds)
*1*18*32## (on for 0.5 seconds)

[bozzy-gh]

I'd suggest to add also dimmer feature, like:

*1*2*32## (on at 20% power)
*1*3*32## (on at 30% power)
[...]
*1*9*32## (on at 90% power)
*1*10*32## (on at 100% power)

Also, the "blinking" feature listed above is actually the "timed on" feature. Blinking is configured with the following commands:

*1*20*32## (blinking 0.5 seconds)
*1*21*32## (blinking 1.0 seconds)
*1*22*32## (blinking 1.5 seconds)
*1*23*32## (blinking 2.0 seconds)
*1*24*32## (blinking 2.5 seconds)
*1*25*32## (blinking 3.0 seconds)
*1*26*32## (blinking 3.5 seconds)
*1*27*32## (blinking 4.0 seconds)
*1*28*32## (blinking 4.5 seconds)
*1*29*32## (blinking 5.0 seconds)

[niqdev]

Hi, thanks for the examples, there is already another open issue for the dimmer feature

[niqdev]

[Hacktoberfest] Please contact me to have more info about this issue, any help would be very appreciated. Thanks

[bozzy-gh]

This would be another nice feature to have, indeed. Opening the gate now requires an on and off command to be issued, I'm always a bit scared that something goes wrong after issuing the ON command and let my gate's electromagnet on for too long, causing it (or the transformator) to burn...

[niqdev]

It's in the to do list, but I've just finished to work on the backup and bus feature for the last few months, I doubt I will have more time soon to work on this unfortunately