Capturing stoped after running for about 1 minutes on iPhone6s Plus iOS10.2!

[chsasaw]

The process of ios-minicap is still running, but the web page can‘t capture the screen anymore. Only found on iPhone6s Plus iOS10.2. But iPhone5 ios10.0.1 and iPhone5s 9.3 runs well.

[wangzi1325]

The same issue

[nwlunatic]

I don't think there are any reasons to be so. Any chances usb connection may fail for a while? (like plug cable out and in or usb port have bad contacts)? I don't think ios-minicap can currently handle this situation and you need to just restart it.

If you sure this is not the case, can you please provide steps to reproduce?

[wangzi1325]

Here is the log

[nwlunatic]

If this is a full run.sh log, then you probably have a phone screen turned off. ios-minicap is waiting for a first frame to setup, before it will start a socket server.

[wangzi1325]

I'm sure that the phone's screen was turned on.

[HJ-CN]

I also see this on iPhone6 iOS10.2.

_++ system_profiler SPUSBDataType ++ sed -n -E -e '/(iPhone|iPad)/,/Serial/s/ *Serial Number: *(.+)/\1/p'

• UDID=7289d2b2b593d14266f273b17333a25e0256655d
• PORT=12345
• RESOLUTION=400x600
• ./build/ios_minicap --udid 7289d2b2b593d14266f273b17333a25e0256655d --port 12345 --resolution 400x600 EnableDALDevices 2017-04-26 11:09:38.606 ios_minicap[18747:3161627] Available devices: 2017-04-26 11:09:38.606 ios_minicap[18747:3161627] 7289d2b2b593d14266f273b17333a25e0256655d 2017-04-26 11:09:38.606 ios_minicap[18747:3161627] CC26424RNNEG1HNBU_

[yxys01]

The same issue