origin
origin copied to clipboard
Published
20 hours ago •
openshift
openshift
TRT-2098, TRT-2097: Migrate origin to use OTE, and implement extension-derived suites
Refactors openshift-tests to use OpenShift Tests Extension (OTE) framework for its own tests, and implements externally defined suites.
- Consolidated the many scattered places origin filters tests down to the execution set using filter chains
- Vendors and uses most OTE-provided Cobra commands
- Replaced legacy run-test command with OTE, there's only one way tests are executed now
- Added list command with subcommands for suites, extensions, and tests
- Migrated origin existing suites to use CEL expressions
- Retrieves suites from binaries, and makes them available for use
Skipping CI for Draft Pull Request.
If you want CI signal for your change, please convert it to an actual PR.
You can still manually trigger a test run with /test all
![openshift-ci[bot] avatar](https://avatars.githubusercontent.com/in/91280?v=4 "Published by a pub.dev verified publisher"){kind=small}
/payload-job-with-prs periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview openshift/kubernetes#2330
@stbenjam: trigger 1 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/cefb7d70-46d2-11f0-98cf-d7542a299e08-0
/payload-job-with-prs periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview openshift/kubernetes#2330
@stbenjam: trigger 1 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/7493e860-46e9-11f0-8aa0-3d43604da7f0-0
@stbenjam: The /test command needs one or more targets.
The following commands are available to trigger required jobs:
/test e2e-aws-jenkins
/test e2e-aws-ovn-edge-zones
/test e2e-aws-ovn-fips
/test e2e-aws-ovn-image-registry
/test e2e-aws-ovn-microshift
/test e2e-aws-ovn-microshift-serial
/test e2e-aws-ovn-serial-1of2
/test e2e-aws-ovn-serial-2of2
/test e2e-gcp-ovn
/test e2e-gcp-ovn-builds
/test e2e-gcp-ovn-image-ecosystem
/test e2e-gcp-ovn-upgrade
/test e2e-metal-ipi-ovn-ipv6
/test e2e-vsphere-ovn
/test e2e-vsphere-ovn-upi
/test images
/test lint
/test okd-scos-images
/test unit
/test verify
/test verify-deps
The following commands are available to trigger optional jobs:
/test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
/test e2e-agnostic-ovn-cmd
/test e2e-aws
/test e2e-aws-csi
/test e2e-aws-disruptive
/test e2e-aws-etcd-certrotation
/test e2e-aws-etcd-recovery
/test e2e-aws-ovn
/test e2e-aws-ovn-cgroupsv2
/test e2e-aws-ovn-etcd-scaling
/test e2e-aws-ovn-ipsec-serial
/test e2e-aws-ovn-kube-apiserver-rollout
/test e2e-aws-ovn-kubevirt
/test e2e-aws-ovn-serial-publicnet-1of2
/test e2e-aws-ovn-serial-publicnet-2of2
/test e2e-aws-ovn-single-node
/test e2e-aws-ovn-single-node-serial
/test e2e-aws-ovn-single-node-techpreview
/test e2e-aws-ovn-single-node-techpreview-serial
/test e2e-aws-ovn-single-node-upgrade
/test e2e-aws-ovn-upgrade
/test e2e-aws-ovn-upgrade-rollback
/test e2e-aws-ovn-upi
/test e2e-aws-proxy
/test e2e-azure
/test e2e-azure-ovn-etcd-scaling
/test e2e-azure-ovn-upgrade
/test e2e-baremetalds-kubevirt
/test e2e-external-aws
/test e2e-external-aws-ccm
/test e2e-external-vsphere-ccm
/test e2e-gcp-csi
/test e2e-gcp-disruptive
/test e2e-gcp-fips-serial-1of2
/test e2e-gcp-fips-serial-2of2
/test e2e-gcp-ovn-etcd-scaling
/test e2e-gcp-ovn-rt-upgrade
/test e2e-gcp-ovn-techpreview
/test e2e-gcp-ovn-techpreview-serial-1of2
/test e2e-gcp-ovn-techpreview-serial-2of2
/test e2e-gcp-ovn-usernamespace
/test e2e-hypershift-conformance
/test e2e-metal-ipi-ovn
/test e2e-metal-ipi-ovn-dualstack
/test e2e-metal-ipi-ovn-dualstack-bgp-local-gw-techpreview
/test e2e-metal-ipi-ovn-dualstack-bgp-techpreview
/test e2e-metal-ipi-ovn-dualstack-local-gateway
/test e2e-metal-ipi-ovn-kube-apiserver-rollout
/test e2e-metal-ipi-ovn-virt-dualstack
/test e2e-metal-ipi-ovn-virt-dualstack-techpreview
/test e2e-metal-ipi-serial-1of2
/test e2e-metal-ipi-serial-2of2
/test e2e-metal-ipi-serial-ovn-ipv6-1of2
/test e2e-metal-ipi-serial-ovn-ipv6-2of2
/test e2e-metal-ipi-virtualmedia
/test e2e-metal-ovn-single-node-live-iso
/test e2e-metal-ovn-single-node-with-worker-live-iso
/test e2e-metal-ovn-two-node-arbiter
/test e2e-metal-ovn-two-node-fencing
/test e2e-openstack-ovn
/test e2e-openstack-serial
/test e2e-vsphere-ovn-dualstack-primaryv6
/test e2e-vsphere-ovn-etcd-scaling
/test okd-e2e-gcp
/test okd-scos-e2e-aws-ovn
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd
pull-ci-openshift-origin-main-e2e-aws
pull-ci-openshift-origin-main-e2e-aws-csi
pull-ci-openshift-origin-main-e2e-aws-disruptive
pull-ci-openshift-origin-main-e2e-aws-ovn
pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2
pull-ci-openshift-origin-main-e2e-aws-ovn-edge-zones
pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-aws-ovn-fips
pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade
pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade
pull-ci-openshift-origin-main-e2e-aws-proxy
pull-ci-openshift-origin-main-e2e-azure
pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade
pull-ci-openshift-origin-main-e2e-gcp-csi
pull-ci-openshift-origin-main-e2e-gcp-disruptive
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-1of2
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-2of2
pull-ci-openshift-origin-main-e2e-gcp-ovn
pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-gcp-ovn-rt-upgrade
pull-ci-openshift-origin-main-e2e-gcp-ovn-upgrade
pull-ci-openshift-origin-main-e2e-hypershift-conformance
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack-local-gateway
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-virtualmedia
pull-ci-openshift-origin-main-e2e-openstack-ovn
pull-ci-openshift-origin-main-e2e-openstack-serial
pull-ci-openshift-origin-main-e2e-vsphere-ovn
pull-ci-openshift-origin-main-e2e-vsphere-ovn-dualstack-primaryv6
pull-ci-openshift-origin-main-e2e-vsphere-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-vsphere-ovn-upi
pull-ci-openshift-origin-main-images
pull-ci-openshift-origin-main-lint
pull-ci-openshift-origin-main-okd-e2e-gcp
pull-ci-openshift-origin-main-okd-scos-e2e-aws-ovn
pull-ci-openshift-origin-main-okd-scos-images
pull-ci-openshift-origin-main-unit
pull-ci-openshift-origin-main-verify
pull-ci-openshift-origin-main-verify-deps
In response to this:
/test
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
/test e2e-aws-ovn-serial-1of2 /test e2e-aws-ovn-serial-2of2 /test e2e-gcp-ovn-upgrade /test e2e-aws-ovn-single-node-upgrade /test e2e-aws-ovn-serial-publicnet-1of2 /test e2e-aws-ovn-kube-apiserver-rollout
Risk analysis has seen new tests most likely introduced by this PR. Please ensure that new tests meet guidelines for naming and stability.
New Test Risks for sha: 76bdb98ca619e086bc449cb3d59679e96baefdb7
| Job Name | New Test Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-ovn | Medium - "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on different nodes via service IPs [Suite:openshift/conformance/parallel]" is a new test, and was only seen in one job. |
New tests seen in this PR at sha: 76bdb98ca619e086bc449cb3d59679e96baefdb7
- "[sig-arch] ClusterOperators [apigroup:config.openshift.io] should define at least one namespace in their lists of related objects [Suite:openshift/conformance/parallel]" [Total: 3, Pass: 3, Fail: 0, Flake: 0]
- "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on different nodes via service IPs [Suite:openshift/conformance/parallel]" [Total: 2, Pass: 2, Fail: 0, Flake: 0]
- "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on the same node via service IPs [Suite:openshift/conformance/parallel]" [Total: 3, Pass: 3, Fail: 0, Flake: 0]
![openshift-trt[bot] avatar](https://avatars.githubusercontent.com/u/111778100?v=4 "Published by a pub.dev verified publisher"){kind=small}
@stbenjam: This pull request references TRT-2098 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
This pull request references TRT-2097 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
In response to this:
Refactors openshift-tests to use OpenShift Tests Extension (OTE) framework, and implements externally defined suites.
- Vendors and uses most OTE-provided Cobra commands
- Replaced legacy run-test command with OTE
- Added new list command with subcommands for suites, extensions, and tests
- Migrated origin existing suites to use CEL expressions
- Retrieves suites from binaries, and makes them available
- Consolidated the many scattered places origin filters tests down to the execution set using a new filter chain package
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
@stbenjam: This pull request references TRT-2098 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
This pull request references TRT-2097 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
In response to this:
Refactors openshift-tests to use OpenShift Tests Extension (OTE) framework, and implements externally defined suites.
- Vendors and uses most OTE-provided Cobra commands
- Replaced legacy run-test command with OTE, there's only one way tests are executed now
- Added list command with subcommands for suites, extensions, and tests
- Migrated origin existing suites to use CEL expressions
- Retrieves suites from binaries, and makes them available for use
- Consolidated the many scattered places origin filters tests down to the execution set using a new filter chain package
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
@stbenjam: This pull request references TRT-2098 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
This pull request references TRT-2097 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
In response to this:
Refactors openshift-tests to use OpenShift Tests Extension (OTE) framework, and implements externally defined suites.
- Consolidated the many scattered places origin filters tests down to the execution set using a new filter chain package
- Vendors and uses most OTE-provided Cobra commands
- Replaced legacy run-test command with OTE, there's only one way tests are executed now
- Added list command with subcommands for suites, extensions, and tests
- Migrated origin existing suites to use CEL expressions
- Retrieves suites from binaries, and makes them available for use
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
@stbenjam: This pull request references TRT-2098 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
This pull request references TRT-2097 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
In response to this:
Refactors openshift-tests to use OpenShift Tests Extension (OTE) framework, and implements externally defined suites.
- Consolidated the many scattered places origin filters tests down to the execution set using filter chains
- Vendors and uses most OTE-provided Cobra commands
- Replaced legacy run-test command with OTE, there's only one way tests are executed now
- Added list command with subcommands for suites, extensions, and tests
- Migrated origin existing suites to use CEL expressions
- Retrieves suites from binaries, and makes them available for use
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
Risk analysis has seen new tests most likely introduced by this PR. Please ensure that new tests meet guidelines for naming and stability.
New Test Risks for sha: baa09bd2cf5c687699c566a14cb31f49ff2acb92
| Job Name | New Test Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand Verify if offline PVC expansion works" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volume-expand should not allow expansion of pvcs without AllowVolumeExpansion property" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumeMode should not mount / map unused volumes in a pod [LinuxOnly]" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumes should store data" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand Verify if offline PVC expansion works" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup applied to the volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], rwop pod created with an initial fsgroup, new pod fsgroup applied to volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup skips ownership changes to the volume contents" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should mount multiple PV pointing to the same storage on the same node" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should provision storage with mount options" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should be able to unmount after the subpath directory is deleted [LinuxOnly]" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should support existing directories when readOnly specified in the volumeSource" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should support existing directory" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should support existing single file [LinuxOnly]" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| (...showing 20 of 108 rows) |
New tests seen in this PR at sha: baa09bd2cf5c687699c566a14cb31f49ff2acb92
- "[sig-arch] ClusterOperators [apigroup:config.openshift.io] should define at least one namespace in their lists of related objects [Suite:openshift/conformance/parallel]" [Total: 21, Pass: 21, Fail: 0, Flake: 0]
- "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on different nodes via service IPs [Suite:openshift/conformance/parallel]" [Total: 19, Pass: 19, Fail: 0, Flake: 0]
- "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on the same node via service IPs [Suite:openshift/conformance/parallel]" [Total: 21, Pass: 21, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand Verify if offline PVC expansion works" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volume-expand should not allow expansion of pvcs without AllowVolumeExpansion property" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumeMode should not mount / map unused volumes in a pod [LinuxOnly]" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumes should store data" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand Verify if offline PVC expansion works" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup applied to the volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], rwop pod created with an initial fsgroup, new pod fsgroup applied to volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup skips ownership changes to the volume contents" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should mount multiple PV pointing to the same storage on the same node" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should provision storage with mount options" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should be able to unmount after the subpath directory is deleted [LinuxOnly]" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- (...showing 20 of 111 tests)
@stbenjam: The specified target(s) for /test were not found.
The following commands are available to trigger required jobs:
/test e2e-aws-jenkins
/test e2e-aws-ovn-edge-zones
/test e2e-aws-ovn-fips
/test e2e-aws-ovn-image-registry
/test e2e-aws-ovn-microshift
/test e2e-aws-ovn-microshift-serial
/test e2e-aws-ovn-serial-1of2
/test e2e-aws-ovn-serial-2of2
/test e2e-gcp-ovn
/test e2e-gcp-ovn-builds
/test e2e-gcp-ovn-image-ecosystem
/test e2e-gcp-ovn-upgrade
/test e2e-metal-ipi-ovn-ipv6
/test e2e-vsphere-ovn
/test e2e-vsphere-ovn-upi
/test images
/test lint
/test okd-scos-images
/test unit
/test verify
/test verify-deps
The following commands are available to trigger optional jobs:
/test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
/test e2e-agnostic-ovn-cmd
/test e2e-aws
/test e2e-aws-csi
/test e2e-aws-disruptive
/test e2e-aws-etcd-certrotation
/test e2e-aws-etcd-recovery
/test e2e-aws-ovn
/test e2e-aws-ovn-cgroupsv2
/test e2e-aws-ovn-etcd-scaling
/test e2e-aws-ovn-ipsec-serial
/test e2e-aws-ovn-kube-apiserver-rollout
/test e2e-aws-ovn-kubevirt
/test e2e-aws-ovn-serial-publicnet-1of2
/test e2e-aws-ovn-serial-publicnet-2of2
/test e2e-aws-ovn-single-node
/test e2e-aws-ovn-single-node-serial
/test e2e-aws-ovn-single-node-techpreview
/test e2e-aws-ovn-single-node-techpreview-serial
/test e2e-aws-ovn-single-node-upgrade
/test e2e-aws-ovn-upgrade
/test e2e-aws-ovn-upgrade-rollback
/test e2e-aws-ovn-upi
/test e2e-aws-proxy
/test e2e-azure
/test e2e-azure-ovn-etcd-scaling
/test e2e-azure-ovn-upgrade
/test e2e-baremetalds-kubevirt
/test e2e-external-aws
/test e2e-external-aws-ccm
/test e2e-external-vsphere-ccm
/test e2e-gcp-csi
/test e2e-gcp-disruptive
/test e2e-gcp-fips-serial-1of2
/test e2e-gcp-fips-serial-2of2
/test e2e-gcp-ovn-etcd-scaling
/test e2e-gcp-ovn-rt-upgrade
/test e2e-gcp-ovn-techpreview
/test e2e-gcp-ovn-techpreview-serial-1of2
/test e2e-gcp-ovn-techpreview-serial-2of2
/test e2e-gcp-ovn-usernamespace
/test e2e-hypershift-conformance
/test e2e-metal-ipi-ovn
/test e2e-metal-ipi-ovn-dualstack
/test e2e-metal-ipi-ovn-dualstack-bgp
/test e2e-metal-ipi-ovn-dualstack-bgp-local-gw
/test e2e-metal-ipi-ovn-dualstack-local-gateway
/test e2e-metal-ipi-ovn-kube-apiserver-rollout
/test e2e-metal-ipi-ovn-virt-dualstack
/test e2e-metal-ipi-ovn-virt-dualstack-techpreview
/test e2e-metal-ipi-serial-1of2
/test e2e-metal-ipi-serial-2of2
/test e2e-metal-ipi-serial-ovn-ipv6-1of2
/test e2e-metal-ipi-serial-ovn-ipv6-2of2
/test e2e-metal-ipi-virtualmedia
/test e2e-metal-ovn-single-node-live-iso
/test e2e-metal-ovn-single-node-with-worker-live-iso
/test e2e-metal-ovn-two-node-arbiter
/test e2e-metal-ovn-two-node-fencing
/test e2e-openstack-ovn
/test e2e-openstack-serial
/test e2e-vsphere-ovn-dualstack-primaryv6
/test e2e-vsphere-ovn-etcd-scaling
/test okd-e2e-gcp
/test okd-scos-e2e-aws-ovn
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd
pull-ci-openshift-origin-main-e2e-aws
pull-ci-openshift-origin-main-e2e-aws-csi
pull-ci-openshift-origin-main-e2e-aws-disruptive
pull-ci-openshift-origin-main-e2e-aws-ovn
pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2
pull-ci-openshift-origin-main-e2e-aws-ovn-edge-zones
pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-aws-ovn-fips
pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade
pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade
pull-ci-openshift-origin-main-e2e-aws-proxy
pull-ci-openshift-origin-main-e2e-azure
pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade
pull-ci-openshift-origin-main-e2e-gcp-csi
pull-ci-openshift-origin-main-e2e-gcp-disruptive
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-1of2
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-2of2
pull-ci-openshift-origin-main-e2e-gcp-ovn
pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-gcp-ovn-rt-upgrade
pull-ci-openshift-origin-main-e2e-gcp-ovn-upgrade
pull-ci-openshift-origin-main-e2e-hypershift-conformance
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack-local-gateway
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-virtualmedia
pull-ci-openshift-origin-main-e2e-openstack-ovn
pull-ci-openshift-origin-main-e2e-openstack-serial
pull-ci-openshift-origin-main-e2e-vsphere-ovn
pull-ci-openshift-origin-main-e2e-vsphere-ovn-dualstack-primaryv6
pull-ci-openshift-origin-main-e2e-vsphere-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-vsphere-ovn-upi
pull-ci-openshift-origin-main-images
pull-ci-openshift-origin-main-lint
pull-ci-openshift-origin-main-okd-e2e-gcp
pull-ci-openshift-origin-main-okd-scos-e2e-aws-ovn
pull-ci-openshift-origin-main-okd-scos-images
pull-ci-openshift-origin-main-unit
pull-ci-openshift-origin-main-verify
pull-ci-openshift-origin-main-verify-deps
In response to this:
/test ci/prow/e2e-gcp-csi
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
@stbenjam: This pull request references TRT-2098 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
This pull request references TRT-2097 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
In response to this:
Refactors openshift-tests to use OpenShift Tests Extension (OTE) framework for its own tests, and implements externally defined suites.
- Consolidated the many scattered places origin filters tests down to the execution set using filter chains
- Vendors and uses most OTE-provided Cobra commands
- Replaced legacy run-test command with OTE, there's only one way tests are executed now
- Added list command with subcommands for suites, extensions, and tests
- Migrated origin existing suites to use CEL expressions
- Retrieves suites from binaries, and makes them available for use
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
Job Failure Risk Analysis for sha: 6c4faccc3017f3c1e6f0b8fda1dc223b8672173f
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-proxy | High [sig-olmv1][OCPFeatureGate:NewOLM][Skipped:Disconnected] OLMv1 openshift-community-operators Catalog should serve FBC via the /v1/api/all endpoint [Suite:openshift/conformance/parallel] This test has passed 98.38% of 2770 runs on release 4.20 [Overall] in the last week. |
| pull-ci-openshift-origin-main-e2e-gcp-csi | IncompleteTests Tests for this run (19) are below the historical average (1607): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
Risk analysis has seen new tests most likely introduced by this PR. Please ensure that new tests meet guidelines for naming and stability.
New Test Risks for sha: 6c4faccc3017f3c1e6f0b8fda1dc223b8672173f
| Job Name | New Test Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand Verify if offline PVC expansion works" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volume-expand should not allow expansion of pvcs without AllowVolumeExpansion property" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumeMode should not mount / map unused volumes in a pod [LinuxOnly]" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumes should store data" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand Verify if offline PVC expansion works" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup applied to the volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], rwop pod created with an initial fsgroup, new pod fsgroup applied to volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup skips ownership changes to the volume contents" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | High - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should mount multiple PV pointing to the same storage on the same node" is a new test, was only seen in one job, and failed 1 time(s) against the current commit. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should provision storage with mount options" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should be able to unmount after the subpath directory is deleted [LinuxOnly]" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should support existing directories when readOnly specified in the volumeSource" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should support existing directory" is a new test, and was only seen in one job. |
| pull-ci-openshift-origin-main-e2e-gcp-ovn | Medium - "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should support existing single file [LinuxOnly]" is a new test, and was only seen in one job. |
| (...showing 20 of 108 rows) |
New tests seen in this PR at sha: 6c4faccc3017f3c1e6f0b8fda1dc223b8672173f
- "[sig-arch] ClusterOperators [apigroup:config.openshift.io] should define at least one namespace in their lists of related objects [Suite:openshift/conformance/parallel]" [Total: 5, Pass: 5, Fail: 0, Flake: 0]
- "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on different nodes via service IPs [Suite:openshift/conformance/parallel]" [Total: 5, Pass: 5, Fail: 0, Flake: 0]
- "[sig-network] services when using a plugin in a mode that does not isolate namespaces by default should allow connections to pods in different namespaces on the same node via service IPs [Suite:openshift/conformance/parallel]" [Total: 5, Pass: 5, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand Verify if offline PVC expansion works" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volume-expand should not allow expansion of pvcs without AllowVolumeExpansion property" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumeMode should not mount / map unused volumes in a pod [LinuxOnly]" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (block volmode)] volumes should store data" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand Verify if offline PVC expansion works" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup applied to the volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (Always)[LinuxOnly], rwop pod created with an initial fsgroup, new pod fsgroup applied to volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, new pod fsgroup applied to volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with different fsgroup applied to the volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] fsgroupchangepolicy (OnRootMismatch)[LinuxOnly], pod created with an initial fsgroup, volume contents ownership changed via chgrp in first pod, new pod with same fsgroup skips ownership changes to the volume contents" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should mount multiple PV pointing to the same storage on the same node" [Total: 1, Pass: 0, Fail: 1, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] provisioning should provision storage with mount options" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- "[sig-storage] In-tree Volumes [Driver: gcepd] [Testpattern: Dynamic PV (default fs)] subPath should be able to unmount after the subpath directory is deleted [LinuxOnly]" [Total: 1, Pass: 1, Fail: 0, Flake: 0]
- (...showing 20 of 111 tests)
/payload-job periodic-ci-openshift-release-master-ci-4.20-upgrade-from-stable-4.19-e2e-gcp-ovn-rt-upgrade periodic-ci-openshift-hypershift-release-4.20-periodics-e2e-aws-ovn-conformance periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview-serial periodic-ci-openshift-release-master-nightly-4.20-e2e-metal-ipi-ovn-ipv6 periodic-ci-openshift-release-master-ci-4.20-e2e-azure-ovn-upgrade
@stbenjam: trigger 5 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.20-upgrade-from-stable-4.19-e2e-gcp-ovn-rt-upgrade
- periodic-ci-openshift-hypershift-release-4.20-periodics-e2e-aws-ovn-conformance
- periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview-serial
- periodic-ci-openshift-release-master-nightly-4.20-e2e-metal-ipi-ovn-ipv6
- periodic-ci-openshift-release-master-ci-4.20-e2e-azure-ovn-upgrade
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/b755d100-4ac6-11f0-8a98-a6ab40c4bfe3-0