origin
origin copied to clipboard
Published
20 hours ago •
openshift
openshift
Initial tests for Two Nodes OCP with Fencing (TNF) cluster
Add initial topology tests
- Ensure correct number of ControlPlanes, Workers, Arbiters
- Ensure correct number of static etcd pod containers
- Ensure correct number of podman etcd containers
Add initial behavior tests
- Ensure the cluster can handle a graceful node shutdown
Closes: OCPEDGE-1481, OCPEDGE-1482
Job Failure Risk Analysis for sha: fe755b34c575650996750c59f15ad3aef18de0e6
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-disruptive | Medium [bz-Etcd] clusteroperator/etcd should not change condition/Available Potential external regression detected for High Risk Test analysis --- [sig-node] static pods should start after being created Potential external regression detected for High Risk Test analysis |
| pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling | Low [bz-Cloud Compute] clusteroperator/control-plane-machine-set should not change condition/Degraded This test has passed 0.00% of 1 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:azure SecurityMode:default Topology:ha Upgrade:none] in the last week. --- [bz-kube-storage-version-migrator] clusteroperator/kube-storage-version-migrator should not change condition/Available This test has passed 0.00% of 1 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:azure SecurityMode:default Topology:ha Upgrade:none] in the last week. |
![openshift-trt[bot] avatar](https://avatars.githubusercontent.com/u/111778100?v=4 "Published by a pub.dev verified publisher"){kind=small}
/test e2e-metal-ipi-ovn-two-node-arbiter e2e-metal-ipi-ovn-two-node-fencing
@eggfoobar: The specified target(s) for /test were not found.
The following commands are available to trigger required jobs:
/test e2e-aws-jenkins
/test e2e-aws-ovn-edge-zones
/test e2e-aws-ovn-fips
/test e2e-aws-ovn-image-registry
/test e2e-aws-ovn-microshift
/test e2e-aws-ovn-microshift-serial
/test e2e-aws-ovn-serial-1of2
/test e2e-aws-ovn-serial-2of2
/test e2e-gcp-ovn
/test e2e-gcp-ovn-builds
/test e2e-gcp-ovn-image-ecosystem
/test e2e-gcp-ovn-upgrade
/test e2e-metal-ipi-ovn-ipv6
/test e2e-vsphere-ovn
/test e2e-vsphere-ovn-upi
/test images
/test lint
/test okd-scos-images
/test unit
/test verify
/test verify-deps
The following commands are available to trigger optional jobs:
/test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
/test e2e-agnostic-ovn-cmd
/test e2e-aws
/test e2e-aws-csi
/test e2e-aws-disruptive
/test e2e-aws-etcd-certrotation
/test e2e-aws-etcd-recovery
/test e2e-aws-ovn
/test e2e-aws-ovn-cgroupsv2
/test e2e-aws-ovn-etcd-scaling
/test e2e-aws-ovn-ipsec-serial
/test e2e-aws-ovn-kube-apiserver-rollout
/test e2e-aws-ovn-kubevirt
/test e2e-aws-ovn-serial-publicnet-1of2
/test e2e-aws-ovn-serial-publicnet-2of2
/test e2e-aws-ovn-single-node
/test e2e-aws-ovn-single-node-serial
/test e2e-aws-ovn-single-node-techpreview
/test e2e-aws-ovn-single-node-techpreview-serial
/test e2e-aws-ovn-single-node-upgrade
/test e2e-aws-ovn-upgrade
/test e2e-aws-ovn-upgrade-rollback
/test e2e-aws-ovn-upi
/test e2e-aws-ovn-virt-techpreview
/test e2e-aws-proxy
/test e2e-azure
/test e2e-azure-ovn-etcd-scaling
/test e2e-azure-ovn-upgrade
/test e2e-baremetalds-kubevirt
/test e2e-external-aws
/test e2e-external-aws-ccm
/test e2e-external-vsphere-ccm
/test e2e-gcp-csi
/test e2e-gcp-disruptive
/test e2e-gcp-fips-serial-1of2
/test e2e-gcp-fips-serial-2of2
/test e2e-gcp-ovn-etcd-scaling
/test e2e-gcp-ovn-rt-upgrade
/test e2e-gcp-ovn-techpreview
/test e2e-gcp-ovn-techpreview-serial-1of2
/test e2e-gcp-ovn-techpreview-serial-2of2
/test e2e-gcp-ovn-usernamespace
/test e2e-hypershift-conformance
/test e2e-metal-ipi-ovn
/test e2e-metal-ipi-ovn-dualstack
/test e2e-metal-ipi-ovn-dualstack-bgp-local-gw-techpreview
/test e2e-metal-ipi-ovn-dualstack-bgp-techpreview
/test e2e-metal-ipi-ovn-dualstack-local-gateway
/test e2e-metal-ipi-ovn-kube-apiserver-rollout
/test e2e-metal-ipi-serial-1of2
/test e2e-metal-ipi-serial-2of2
/test e2e-metal-ipi-serial-ovn-ipv6-1of2
/test e2e-metal-ipi-serial-ovn-ipv6-2of2
/test e2e-metal-ipi-virtualmedia
/test e2e-metal-ovn-single-node-live-iso
/test e2e-metal-ovn-single-node-with-worker-live-iso
/test e2e-metal-ovn-two-node-arbiter
/test e2e-metal-ovn-two-node-fencing
/test e2e-openstack-ovn
/test e2e-openstack-serial
/test e2e-vsphere-ovn-dualstack-primaryv6
/test e2e-vsphere-ovn-etcd-scaling
/test okd-e2e-gcp
/test okd-scos-e2e-aws-ovn
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd
pull-ci-openshift-origin-main-e2e-aws
pull-ci-openshift-origin-main-e2e-aws-csi
pull-ci-openshift-origin-main-e2e-aws-disruptive
pull-ci-openshift-origin-main-e2e-aws-ovn
pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2
pull-ci-openshift-origin-main-e2e-aws-ovn-edge-zones
pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-aws-ovn-fips
pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade
pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade
pull-ci-openshift-origin-main-e2e-aws-proxy
pull-ci-openshift-origin-main-e2e-azure
pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade
pull-ci-openshift-origin-main-e2e-gcp-csi
pull-ci-openshift-origin-main-e2e-gcp-disruptive
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-1of2
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-2of2
pull-ci-openshift-origin-main-e2e-gcp-ovn
pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-gcp-ovn-rt-upgrade
pull-ci-openshift-origin-main-e2e-gcp-ovn-upgrade
pull-ci-openshift-origin-main-e2e-hypershift-conformance
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack-local-gateway
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-virtualmedia
pull-ci-openshift-origin-main-e2e-openstack-ovn
pull-ci-openshift-origin-main-e2e-openstack-serial
pull-ci-openshift-origin-main-e2e-vsphere-ovn
pull-ci-openshift-origin-main-e2e-vsphere-ovn-dualstack-primaryv6
pull-ci-openshift-origin-main-e2e-vsphere-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-vsphere-ovn-upi
pull-ci-openshift-origin-main-images
pull-ci-openshift-origin-main-lint
pull-ci-openshift-origin-main-okd-e2e-gcp
pull-ci-openshift-origin-main-okd-scos-e2e-aws-ovn
pull-ci-openshift-origin-main-okd-scos-images
pull-ci-openshift-origin-main-unit
pull-ci-openshift-origin-main-verify
pull-ci-openshift-origin-main-verify-deps
In response to this:
/test e2e-metal-ipi-ovn-two-node-arbiter e2e-metal-ipi-ovn-two-node-fencing
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
![openshift-ci[bot] avatar](https://avatars.githubusercontent.com/in/91280?v=4 "Published by a pub.dev verified publisher"){kind=small}
/test e2e-metal-ipi-ovn-two-node-arbiter /test e2e-metal-ipi-ovn-two-node-fencing
@eggfoobar: The specified target(s) for /test were not found.
The following commands are available to trigger required jobs:
/test e2e-aws-jenkins
/test e2e-aws-ovn-edge-zones
/test e2e-aws-ovn-fips
/test e2e-aws-ovn-image-registry
/test e2e-aws-ovn-microshift
/test e2e-aws-ovn-microshift-serial
/test e2e-aws-ovn-serial-1of2
/test e2e-aws-ovn-serial-2of2
/test e2e-gcp-ovn
/test e2e-gcp-ovn-builds
/test e2e-gcp-ovn-image-ecosystem
/test e2e-gcp-ovn-upgrade
/test e2e-metal-ipi-ovn-ipv6
/test e2e-vsphere-ovn
/test e2e-vsphere-ovn-upi
/test images
/test lint
/test okd-scos-images
/test unit
/test verify
/test verify-deps
The following commands are available to trigger optional jobs:
/test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
/test e2e-agnostic-ovn-cmd
/test e2e-aws
/test e2e-aws-csi
/test e2e-aws-disruptive
/test e2e-aws-etcd-certrotation
/test e2e-aws-etcd-recovery
/test e2e-aws-ovn
/test e2e-aws-ovn-cgroupsv2
/test e2e-aws-ovn-etcd-scaling
/test e2e-aws-ovn-ipsec-serial
/test e2e-aws-ovn-kube-apiserver-rollout
/test e2e-aws-ovn-kubevirt
/test e2e-aws-ovn-serial-publicnet-1of2
/test e2e-aws-ovn-serial-publicnet-2of2
/test e2e-aws-ovn-single-node
/test e2e-aws-ovn-single-node-serial
/test e2e-aws-ovn-single-node-techpreview
/test e2e-aws-ovn-single-node-techpreview-serial
/test e2e-aws-ovn-single-node-upgrade
/test e2e-aws-ovn-upgrade
/test e2e-aws-ovn-upgrade-rollback
/test e2e-aws-ovn-upi
/test e2e-aws-ovn-virt-techpreview
/test e2e-aws-proxy
/test e2e-azure
/test e2e-azure-ovn-etcd-scaling
/test e2e-azure-ovn-upgrade
/test e2e-baremetalds-kubevirt
/test e2e-external-aws
/test e2e-external-aws-ccm
/test e2e-external-vsphere-ccm
/test e2e-gcp-csi
/test e2e-gcp-disruptive
/test e2e-gcp-fips-serial-1of2
/test e2e-gcp-fips-serial-2of2
/test e2e-gcp-ovn-etcd-scaling
/test e2e-gcp-ovn-rt-upgrade
/test e2e-gcp-ovn-techpreview
/test e2e-gcp-ovn-techpreview-serial-1of2
/test e2e-gcp-ovn-techpreview-serial-2of2
/test e2e-gcp-ovn-usernamespace
/test e2e-hypershift-conformance
/test e2e-metal-ipi-ovn
/test e2e-metal-ipi-ovn-dualstack
/test e2e-metal-ipi-ovn-dualstack-bgp-local-gw-techpreview
/test e2e-metal-ipi-ovn-dualstack-bgp-techpreview
/test e2e-metal-ipi-ovn-dualstack-local-gateway
/test e2e-metal-ipi-ovn-kube-apiserver-rollout
/test e2e-metal-ipi-serial-1of2
/test e2e-metal-ipi-serial-2of2
/test e2e-metal-ipi-serial-ovn-ipv6-1of2
/test e2e-metal-ipi-serial-ovn-ipv6-2of2
/test e2e-metal-ipi-virtualmedia
/test e2e-metal-ovn-single-node-live-iso
/test e2e-metal-ovn-single-node-with-worker-live-iso
/test e2e-metal-ovn-two-node-arbiter
/test e2e-metal-ovn-two-node-fencing
/test e2e-openstack-ovn
/test e2e-openstack-serial
/test e2e-vsphere-ovn-dualstack-primaryv6
/test e2e-vsphere-ovn-etcd-scaling
/test okd-e2e-gcp
/test okd-scos-e2e-aws-ovn
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback
pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd
pull-ci-openshift-origin-main-e2e-aws
pull-ci-openshift-origin-main-e2e-aws-csi
pull-ci-openshift-origin-main-e2e-aws-disruptive
pull-ci-openshift-origin-main-e2e-aws-ovn
pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2
pull-ci-openshift-origin-main-e2e-aws-ovn-edge-zones
pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-aws-ovn-fips
pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade
pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade
pull-ci-openshift-origin-main-e2e-aws-proxy
pull-ci-openshift-origin-main-e2e-azure
pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade
pull-ci-openshift-origin-main-e2e-gcp-csi
pull-ci-openshift-origin-main-e2e-gcp-disruptive
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-1of2
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-2of2
pull-ci-openshift-origin-main-e2e-gcp-ovn
pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-gcp-ovn-rt-upgrade
pull-ci-openshift-origin-main-e2e-gcp-ovn-upgrade
pull-ci-openshift-origin-main-e2e-hypershift-conformance
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack-local-gateway
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-virtualmedia
pull-ci-openshift-origin-main-e2e-openstack-ovn
pull-ci-openshift-origin-main-e2e-openstack-serial
pull-ci-openshift-origin-main-e2e-vsphere-ovn
pull-ci-openshift-origin-main-e2e-vsphere-ovn-dualstack-primaryv6
pull-ci-openshift-origin-main-e2e-vsphere-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-vsphere-ovn-upi
pull-ci-openshift-origin-main-images
pull-ci-openshift-origin-main-lint
pull-ci-openshift-origin-main-okd-e2e-gcp
pull-ci-openshift-origin-main-okd-scos-e2e-aws-ovn
pull-ci-openshift-origin-main-okd-scos-images
pull-ci-openshift-origin-main-unit
pull-ci-openshift-origin-main-verify
pull-ci-openshift-origin-main-verify-deps
In response to this:
/test e2e-metal-ipi-ovn-two-node-arbiter /test e2e-metal-ipi-ovn-two-node-fencing
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
/test e2e-metal-ovn-two-node-arbiter /test e2e-metal-ovn-two-node-fencing
Job Failure Risk Analysis for sha: e540ed0df26940b64503be49f3cf2b1296bc25f8
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback | High operator conditions network This test has passed 98.99% of 3859 runs on release 4.20 [Overall] in the last week. |
| pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade | IncompleteTests Tests for this run (18) are below the historical average (2883): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
Job Failure Risk Analysis for sha: 03c32323c645cb1c09dcd92e717a5c5780e44e46
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial | IncompleteTests Tests for this run (27) are below the historical average (1762): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-metal-ipi-ovn | IncompleteTests Tests for this run (103) are below the historical average (3084): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
Job Failure Risk Analysis for sha: 5ceaa9d139b939558d63f9675b733a0b05693b6c
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-disruptive | High [bz-Etcd] clusteroperator/etcd should not change condition/Available This test has passed 99.85% of 3918 runs on release 4.20 [Overall] in the last week. |
Job Failure Risk Analysis for sha: 160d4672f62a5b4e71ce2011f04ea23aa6c3a510
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-disruptive | High [sig-arch] events should not repeat pathologically for ns/openshift-kube-apiserver-operator This test has passed 99.97% of 3704 runs on release 4.20 [Overall] in the last week. |
| pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade | Medium Job run should complete before timeout This test has passed 95.30% of 2744 runs on release 4.20 [Overall] in the last week. |
@clobrano: This pull request references OCPEDGE-1481 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the story to target the "4.20.0" version, but no target version was set.
In response to this:
Add initial topology tests
- Ensure correct number of ControlPlanes, and Arbiters
- Ensure correct number of static etcd pod containers
- Ensure correct number of podman etcd containers
Add initial behavior tests
- Ensure the cluster can handle a graceful node shutdown
Closes: OCPEDGE-1481, OCPEDGE-1482
As a starting point for test integration within this new cluster environment, this change enables only a minimal set of monitors. These monitors are known to be reliable in general, but are currently exhibiting unexpected behavior in this specific cluster.
This approach allows us to establish a foundational test base. Further investigation into the reasons for their misbehavior in this new cluster will be conducted once this initial test setup is merged.
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
/retest-required
Remaining retests: 0 against base HEAD 25259415f83d2cac48232a5944ae65ffbc1d418c and 2 for PR HEAD 036aa57d234b84a9a71de2ed9a680b7df933b86d in total
Job Failure Risk Analysis for sha: 036aa57d234b84a9a71de2ed9a680b7df933b86d
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-disruptive | Medium [sig-node] static pods should start after being created Potential external regression detected for High Risk Test analysis |
| pull-ci-openshift-origin-main-e2e-gcp-disruptive | Medium [sig-architecture] platform pods in ns/openshift-etcd should not exit an excessive amount of times Potential external regression detected for High Risk Test analysis --- [bz-Etcd] clusteroperator/etcd should not change condition/Available Potential external regression detected for High Risk Test analysis --- [sig-node] static pods should start after being created Potential external regression detected for High Risk Test analysis |
| pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling | Low [bz-Cloud Compute] clusteroperator/control-plane-machine-set should not change condition/Degraded This test has passed 0.00% of 1 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:gcp SecurityMode:default Topology:ha Upgrade:none] in the last week. |
| pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6 | IncompleteTests Tests for this run (15) are below the historical average (2223): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
Job Failure Risk Analysis for sha: bd2829229053647e083491ad8bcb37e138ab30e9
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling | IncompleteTests Tests for this run (17) are below the historical average (1258): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6 | IncompleteTests Tests for this run (15) are below the historical average (2144): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-1of2 | IncompleteTests Tests for this run (15) are below the historical average (1093): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
/retest-required
Remaining retests: 0 against base HEAD 25259415f83d2cac48232a5944ae65ffbc1d418c and 2 for PR HEAD ef66afeab797ea8e82a6d0181a69622732a104e5 in total
/retest-required
Remaining retests: 0 against base HEAD 25259415f83d2cac48232a5944ae65ffbc1d418c and 2 for PR HEAD ef66afeab797ea8e82a6d0181a69622732a104e5 in total
/retest-required
Remaining retests: 0 against base HEAD 25259415f83d2cac48232a5944ae65ffbc1d418c and 2 for PR HEAD ef66afeab797ea8e82a6d0181a69622732a104e5 in total
Job Failure Risk Analysis for sha: ef66afeab797ea8e82a6d0181a69622732a104e5
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd | IncompleteTests Tests for this run (19) are below the historical average (1093): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws | IncompleteTests Tests for this run (18) are below the historical average (1912): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-csi | IncompleteTests Tests for this run (18) are below the historical average (1108): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-disruptive | IncompleteTests Tests for this run (18) are below the historical average (974): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn | IncompleteTests Tests for this run (18) are below the historical average (2013): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2 | IncompleteTests Tests for this run (18) are below the historical average (1952): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling | IncompleteTests Tests for this run (18) are below the historical average (1117): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout | IncompleteTests Tests for this run (18) are below the historical average (1088): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2 | IncompleteTests Tests for this run (18) are below the historical average (1209): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2 | IncompleteTests Tests for this run (18) are below the historical average (1109): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node | IncompleteTests Tests for this run (18) are below the historical average (1551): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial | IncompleteTests Tests for this run (18) are below the historical average (1001): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade | IncompleteTests Tests for this run (19) are below the historical average (2554): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade | IncompleteTests Tests for this run (20) are below the historical average (1069): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-proxy | IncompleteTests Tests for this run (19) are below the historical average (1835): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-azure | IncompleteTests Tests for this run (19) are below the historical average (2008): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling | IncompleteTests Tests for this run (19) are below the historical average (1159): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade | IncompleteTests Tests for this run (19) are below the historical average (2534): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-gcp-csi | IncompleteTests Tests for this run (18) are below the historical average (426): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-gcp-disruptive | IncompleteTests Tests for this run (19) are below the historical average (365): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
Showing 20 of 37 jobs analysis
Job Failure Risk Analysis for sha: ef66afeab797ea8e82a6d0181a69622732a104e5
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd | IncompleteTests Tests for this run (19) are below the historical average (1093): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws | IncompleteTests Tests for this run (18) are below the historical average (1912): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-csi | IncompleteTests Tests for this run (18) are below the historical average (1108): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-disruptive | IncompleteTests Tests for this run (18) are below the historical average (974): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn | IncompleteTests Tests for this run (18) are below the historical average (2013): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2 | IncompleteTests Tests for this run (18) are below the historical average (1952): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling | IncompleteTests Tests for this run (18) are below the historical average (1117): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout | IncompleteTests Tests for this run (18) are below the historical average (1088): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2 | IncompleteTests Tests for this run (18) are below the historical average (1209): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2 | IncompleteTests Tests for this run (18) are below the historical average (1109): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node | IncompleteTests Tests for this run (18) are below the historical average (1551): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial | IncompleteTests Tests for this run (18) are below the historical average (1001): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade | IncompleteTests Tests for this run (19) are below the historical average (2554): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade | IncompleteTests Tests for this run (20) are below the historical average (1069): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-proxy | IncompleteTests Tests for this run (19) are below the historical average (1835): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-azure | IncompleteTests Tests for this run (19) are below the historical average (2008): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling | IncompleteTests Tests for this run (19) are below the historical average (1159): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade | IncompleteTests Tests for this run (19) are below the historical average (2534): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-gcp-csi | IncompleteTests Tests for this run (18) are below the historical average (426): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-gcp-disruptive | IncompleteTests Tests for this run (19) are below the historical average (365): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
Showing 20 of 37 jobs analysis