origin
origin copied to clipboard
openshift
OPRUN-3863: Add olmv1 webhook support origin tests
Adds origin tests for the webhook support feature. Test need to be run serially to enable BeforeSuite functionality which installs the webhook operator for the tests:
- check validating webhook
- check mutating webhook
- check conversion webhook
- check tls secret exists
- check webhook service exists with openshift-serviceca annotation
(I'm not sure I'd add the last two if it weren't for the need to have 5 tests)
Skipping CI for Draft Pull Request.
If you want CI signal for your change, please convert it to an actual PR.
You can still manually trigger a test run with /test all
![openshift-ci[bot] avatar](https://avatars.githubusercontent.com/in/91280?v=4 "Published by a pub.dev verified publisher"){kind=small}
@perdasilva: This pull request references OPRUN-3863 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the task to target the "4.20.0" version, but no target version was set.
In response to this:
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
Job Failure Risk Analysis for sha: e1e5feb17557290d4f7eb9aba8e6e573b6377a18
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack-bgp-techpreview | IncompleteTests Tests for this run (22) are below the historical average (3048): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
![openshift-trt[bot] avatar](https://avatars.githubusercontent.com/u/111778100?v=4 "Published by a pub.dev verified publisher"){kind=small}
@perdasilva: This pull request references OPRUN-3863 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the task to target the "4.20.0" version, but no target version was set.
In response to this:
Adds origin tests for the webhook support feature. Test need to be run serially to enable BeforeSuite functionality which installs the webhook operator for the tests:
- check validating webhook
- check mutating webhook
- check conversion webhook
- check tls secret exists
- check webhook service exists with openshift-serviceca annotation
(I'm not sure I'd add the last two if it weren't for the need to have 5 tests)
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
Job Failure Risk Analysis for sha: 44a9c22fb5c91f73eea08e88af5ecd43fc9101db
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback | IncompleteTests Tests for this run (12) are below the historical average (245): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-gcp-disruptive | Medium [sig-node] static pods should start after being created Potential external regression detected for High Risk Test analysis --- [sig-arch][Late] operators should not create watch channels very often Potential external regression detected for High Risk Test analysis Open Bugs Component Readiness Shows Old Test Name For Renamed Tests ResilientWatchCacheInitialization (Re)enablement - operator watch counts from component readiness |
| pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling | Low [bz-kube-storage-version-migrator] clusteroperator/kube-storage-version-migrator should not change condition/Available This test has passed 69.42% of 5144 runs on release 4.20 [Overall] in the last week. --- [bz-Cloud Compute] clusteroperator/control-plane-machine-set should not change condition/Degraded This test has passed 0.00% of 1 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:gcp SecurityMode:default Topology:ha Upgrade:none] in the last week. |
Job Failure Risk Analysis for sha: 51a650dda27289b1d581b35fa4e38567fb2db8cd
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback | IncompleteTests Tests for this run (86) are below the historical average (231): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-disruptive | Medium [bz-openshift-apiserver] clusteroperator/openshift-apiserver should not change condition/Available Potential external regression detected for High Risk Test analysis Open Bugs CI: API is broken in periodic-ci-openshift-release-master-nightly-4.19-e2e-aws-ovn-single-node-techpreview-serial openshift-apiserver ClusterOperator should not blip Available=False on brief missing HTTP content-type --- [sig-network] pods should successfully create sandboxes by writing network status Potential external regression detected for High Risk Test analysis Open Bugs etcd timeouts causing failed pod sandbox creation writing network status |
Job Failure Risk Analysis for sha: 36008d8e5de923efd9f5d0e766d83d82c6672858
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback | IncompleteTests Tests for this run (85) are below the historical average (213): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-disruptive | Medium [sig-node] static pods should start after being created Potential external regression detected for High Risk Test analysis Open Bugs [sig-node] static pods should start after being created |
| pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling | High [sig-architecture] platform pods in ns/openshift-etcd should not exit an excessive amount of times This test has passed 100.00% of 2 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:aws SecurityMode:default Topology:ha Upgrade:none] in the last week. |
@perdasilva: The specified target(s) for /test were not found.
The following commands are available to trigger required jobs:
/test e2e-aws-jenkins
/test e2e-aws-ovn-edge-zones
/test e2e-aws-ovn-fips
/test e2e-aws-ovn-image-registry
/test e2e-aws-ovn-microshift
/test e2e-aws-ovn-microshift-serial
/test e2e-aws-ovn-serial-1of2
/test e2e-aws-ovn-serial-2of2
/test e2e-gcp-ovn
/test e2e-gcp-ovn-builds
/test e2e-gcp-ovn-image-ecosystem
/test e2e-gcp-ovn-upgrade
/test e2e-metal-ipi-ovn-ipv6
/test e2e-vsphere-ovn
/test e2e-vsphere-ovn-upi
/test images
/test lint
/test okd-scos-images
/test unit
/test verify
/test verify-deps
The following commands are available to trigger optional jobs:
/test e2e-agnostic-ovn-cmd
/test e2e-aws
/test e2e-aws-csi
/test e2e-aws-disruptive
/test e2e-aws-etcd-certrotation
/test e2e-aws-etcd-recovery
/test e2e-aws-ovn
/test e2e-aws-ovn-cgroupsv2
/test e2e-aws-ovn-etcd-scaling
/test e2e-aws-ovn-ipsec-serial
/test e2e-aws-ovn-kube-apiserver-rollout
/test e2e-aws-ovn-kubevirt
/test e2e-aws-ovn-serial-publicnet-1of2
/test e2e-aws-ovn-serial-publicnet-2of2
/test e2e-aws-ovn-single-node
/test e2e-aws-ovn-single-node-serial
/test e2e-aws-ovn-single-node-techpreview
/test e2e-aws-ovn-single-node-techpreview-serial
/test e2e-aws-ovn-single-node-upgrade
/test e2e-aws-ovn-upgrade
/test e2e-aws-ovn-upgrade-rollback
/test e2e-aws-ovn-upi
/test e2e-aws-proxy
/test e2e-azure
/test e2e-azure-ovn-etcd-scaling
/test e2e-azure-ovn-upgrade
/test e2e-baremetalds-kubevirt
/test e2e-external-aws
/test e2e-external-aws-ccm
/test e2e-external-vsphere-ccm
/test e2e-gcp-csi
/test e2e-gcp-disruptive
/test e2e-gcp-fips-serial-1of2
/test e2e-gcp-fips-serial-2of2
/test e2e-gcp-ovn-etcd-scaling
/test e2e-gcp-ovn-rt-upgrade
/test e2e-gcp-ovn-techpreview
/test e2e-gcp-ovn-techpreview-serial-1of2
/test e2e-gcp-ovn-techpreview-serial-2of2
/test e2e-gcp-ovn-usernamespace
/test e2e-hypershift-conformance
/test e2e-metal-ipi-ovn
/test e2e-metal-ipi-ovn-bgp-virt-dualstack
/test e2e-metal-ipi-ovn-bgp-virt-dualstack-techpreview
/test e2e-metal-ipi-ovn-dualstack
/test e2e-metal-ipi-ovn-dualstack-bgp
/test e2e-metal-ipi-ovn-dualstack-bgp-local-gw
/test e2e-metal-ipi-ovn-dualstack-local-gateway
/test e2e-metal-ipi-ovn-kube-apiserver-rollout
/test e2e-metal-ipi-serial-1of2
/test e2e-metal-ipi-serial-2of2
/test e2e-metal-ipi-serial-ovn-ipv6-1of2
/test e2e-metal-ipi-serial-ovn-ipv6-2of2
/test e2e-metal-ipi-virtualmedia
/test e2e-metal-ovn-single-node-live-iso
/test e2e-metal-ovn-single-node-with-worker-live-iso
/test e2e-metal-ovn-two-node-arbiter
/test e2e-metal-ovn-two-node-fencing
/test e2e-openstack-ovn
/test e2e-openstack-serial
/test e2e-vsphere-ovn-dualstack-primaryv6
/test e2e-vsphere-ovn-etcd-scaling
/test okd-e2e-gcp
/test okd-scos-e2e-aws-ovn
Use /test all to run the following jobs that were automatically triggered:
pull-ci-openshift-origin-main-e2e-agnostic-ovn-cmd
pull-ci-openshift-origin-main-e2e-aws
pull-ci-openshift-origin-main-e2e-aws-csi
pull-ci-openshift-origin-main-e2e-aws-disruptive
pull-ci-openshift-origin-main-e2e-aws-ovn
pull-ci-openshift-origin-main-e2e-aws-ovn-cgroupsv2
pull-ci-openshift-origin-main-e2e-aws-ovn-edge-zones
pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-aws-ovn-fips
pull-ci-openshift-origin-main-e2e-aws-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift
pull-ci-openshift-origin-main-e2e-aws-ovn-microshift-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-1of2
pull-ci-openshift-origin-main-e2e-aws-ovn-serial-publicnet-2of2
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-serial
pull-ci-openshift-origin-main-e2e-aws-ovn-single-node-upgrade
pull-ci-openshift-origin-main-e2e-aws-ovn-upgrade
pull-ci-openshift-origin-main-e2e-aws-proxy
pull-ci-openshift-origin-main-e2e-azure
pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-azure-ovn-upgrade
pull-ci-openshift-origin-main-e2e-gcp-csi
pull-ci-openshift-origin-main-e2e-gcp-disruptive
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-1of2
pull-ci-openshift-origin-main-e2e-gcp-fips-serial-2of2
pull-ci-openshift-origin-main-e2e-gcp-ovn
pull-ci-openshift-origin-main-e2e-gcp-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-gcp-ovn-rt-upgrade
pull-ci-openshift-origin-main-e2e-gcp-ovn-upgrade
pull-ci-openshift-origin-main-e2e-hypershift-conformance
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-dualstack-local-gateway
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-ipv6
pull-ci-openshift-origin-main-e2e-metal-ipi-ovn-kube-apiserver-rollout
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-1of2
pull-ci-openshift-origin-main-e2e-metal-ipi-serial-ovn-ipv6-2of2
pull-ci-openshift-origin-main-e2e-metal-ipi-virtualmedia
pull-ci-openshift-origin-main-e2e-openstack-ovn
pull-ci-openshift-origin-main-e2e-openstack-serial
pull-ci-openshift-origin-main-e2e-vsphere-ovn
pull-ci-openshift-origin-main-e2e-vsphere-ovn-dualstack-primaryv6
pull-ci-openshift-origin-main-e2e-vsphere-ovn-etcd-scaling
pull-ci-openshift-origin-main-e2e-vsphere-ovn-upi
pull-ci-openshift-origin-main-images
pull-ci-openshift-origin-main-lint
pull-ci-openshift-origin-main-okd-e2e-gcp
pull-ci-openshift-origin-main-okd-scos-e2e-aws-ovn
pull-ci-openshift-origin-main-okd-scos-images
pull-ci-openshift-origin-main-unit
pull-ci-openshift-origin-main-verify
pull-ci-openshift-origin-main-verify-deps
In response to this:
/test e2e-metal-ipi-ovn-dualstack-bgp-techpreview
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.
@perdasilva: This pull request references OPRUN-3863 which is a valid jira issue.
Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the task to target the "4.20.0" version, but no target version was set.
In response to this:
Adds origin tests for the webhook support feature. Test need to be run serially to enable BeforeSuite functionality which installs the webhook operator for the tests:
- check validating webhook
- check mutating webhook
- check conversion webhook
- check service availability during cert secret deletion by continuously creating and deleting a resource after the deletion of the cert secret
- check deployment availability during cert rotation, which is forced to happen when the openshift-service-ca signing key gets deleted.
(I'm not sure I'd add the last two if it weren't for the need to have 5 tests)
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.
Job Failure Risk Analysis for sha: 751a1115915fc21efd2f1070ad967d5e3850ccfe
| Job Name | Failure Risk |
|---|---|
| pull-ci-openshift-origin-main-4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback | IncompleteTests Tests for this run (13) are below the historical average (266): IncompleteTests (not enough tests ran to make a reasonable risk analysis; this could be due to infra, installation, or upgrade problems) |
| pull-ci-openshift-origin-main-e2e-aws-disruptive | High [sig-node] static pods should start after being created This test has passed 99.06% of 5203 runs on release 4.20 [Overall] in the last week. |
| pull-ci-openshift-origin-main-e2e-aws-ovn-etcd-scaling | Low [bz-Cloud Compute] clusteroperator/control-plane-machine-set should not change condition/Degraded This test has passed 50.00% of 2 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:aws SecurityMode:default Topology:ha Upgrade:none] in the last week. |
| pull-ci-openshift-origin-main-e2e-azure-ovn-etcd-scaling | Low [bz-Cloud Compute] clusteroperator/control-plane-machine-set should not change condition/Degraded This test has passed 0.00% of 1 runs on release 4.20 [Architecture:amd64 FeatureSet:default Installer:ipi JobTier:rare Network:ovn NetworkStack:ipv4 Owner:eng Platform:azure SecurityMode:default Topology:ha Upgrade:none] in the last week. --- [bz-kube-storage-version-migrator] clusteroperator/kube-storage-version-migrator should not change condition/Available This test has passed 70.11% of 5203 runs on release 4.20 [Overall] in the last week. Open Bugs [CI] e2e-openstack-ovn-etcd-scaling job permanent fails at many openshift-test tests |
| pull-ci-openshift-origin-main-e2e-gcp-disruptive | High [sig-arch] events should not repeat pathologically for ns/openshift-kube-apiserver-operator This test has passed 99.96% of 5202 runs on release 4.20 [Overall] in the last week. |
/payload-job periodic-ci-openshift-release-master-ci-4.19-e2e-aws-ovn-techpreview-serial
@perdasilva: trigger 1 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.19-e2e-aws-ovn-techpreview-serial
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/bde39b50-60b6-11f0-8574-1255cecb9182-0
/payload-job periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview
@perdasilva: trigger 1 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview-serial
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/6a587380-60c9-11f0-9e53-2a134413be2d-0
@perdasilva: trigger 1 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/22d2d510-60cd-11f0-9076-ff16c0ab5472-0
[APPROVALNOTIFIER] This PR is NOT APPROVED
This pull-request has been approved by: perdasilva, thetechnick Once this PR has been reviewed and has the lgtm label, please assign xueqzhan for approval. For more information see the Code Review Process.
The full list of commands accepted by this bot can be found here.
Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment
/payload-job periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview
@perdasilva: trigger 1 job(s) for the /payload-(with-prs|job|aggregate|job-with-prs|aggregate-with-prs) command
- periodic-ci-openshift-release-master-ci-4.20-e2e-aws-ovn-techpreview
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/ad7c5930-6c70-11f0-881b-c69e0b18b9cb-0
@perdasilva: The following tests failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:
| Test name | Commit | Details | Required | Rerun command |
|---|---|---|---|---|
| ci/prow/4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback | 751a1115915fc21efd2f1070ad967d5e3850ccfe | link | false | /test 4.12-upgrade-from-stable-4.11-e2e-aws-ovn-upgrade-rollback |
| ci/prow/e2e-metal-ipi-ovn-bgp-virt-dualstack-techpreview | 751a1115915fc21efd2f1070ad967d5e3850ccfe | link | false | /test e2e-metal-ipi-ovn-bgp-virt-dualstack-techpreview |
| ci/prow/e2e-aws-ovn-single-node-techpreview | 751a1115915fc21efd2f1070ad967d5e3850ccfe | link | false | /test e2e-aws-ovn-single-node-techpreview |
| ci/prow/e2e-aws-ovn-serial-publicnet-1of2 | c9e6602e262ca8eab3c742cbbeba184c8edfc217 | link | false | /test e2e-aws-ovn-serial-publicnet-1of2 |
| ci/prow/e2e-aws-ovn-serial-publicnet-2of2 | c9e6602e262ca8eab3c742cbbeba184c8edfc217 | link | false | /test e2e-aws-ovn-serial-publicnet-2of2 |
| ci/prow/okd-e2e-gcp | f8a8aa0aadc325458c87387e909e49a6fff61979 | link | false | /test okd-e2e-gcp |
| ci/prow/e2e-azure-ovn-etcd-scaling | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-azure-ovn-etcd-scaling |
| ci/prow/e2e-gcp-fips-serial-1of2 | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-gcp-fips-serial-1of2 |
| ci/prow/e2e-aws-disruptive | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-aws-disruptive |
| ci/prow/e2e-gcp-ovn-techpreview-serial-1of2 | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-gcp-ovn-techpreview-serial-1of2 |
| ci/prow/e2e-gcp-ovn-techpreview-serial-2of2 | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-gcp-ovn-techpreview-serial-2of2 |
| ci/prow/e2e-openstack-ovn | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-openstack-ovn |
| ci/prow/e2e-aws-ovn-single-node-upgrade | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-aws-ovn-single-node-upgrade |
| ci/prow/e2e-gcp-fips-serial-2of2 | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-gcp-fips-serial-2of2 |
| ci/prow/e2e-aws-ovn-etcd-scaling | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-aws-ovn-etcd-scaling |
| ci/prow/e2e-gcp-ovn-etcd-scaling | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-gcp-ovn-etcd-scaling |
| ci/prow/e2e-azure-ovn-upgrade | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-azure-ovn-upgrade |
| ci/prow/e2e-aws-ovn-single-node | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-aws-ovn-single-node |
| ci/prow/e2e-aws-ovn-cgroupsv2 | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-aws-ovn-cgroupsv2 |
| ci/prow/e2e-metal-ipi-virtualmedia | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-metal-ipi-virtualmedia |
| ci/prow/e2e-vsphere-ovn-dualstack-primaryv6 | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-vsphere-ovn-dualstack-primaryv6 |
| ci/prow/e2e-vsphere-ovn-etcd-scaling | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-vsphere-ovn-etcd-scaling |
| ci/prow/e2e-gcp-disruptive | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-gcp-disruptive |
| ci/prow/e2e-openstack-serial | cce87146fc48c8fcf52a517735f0f174fec9ac06 | link | false | /test e2e-openstack-serial |
Full PR test history. Your PR dashboard.
Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.