nxpfrankli

Can you try latest commit (fdead9d170c8585b2949714b14986153cbafb040)? It should be caused by call libusb_deinit without call libusb_init.

can you try latest uuu? 1.3.154 is old one. it is strange. all _file should replace by followed argument.

are you C0 chip or B0 chip?

you should use c0 file imx-boot-imx8qxp**c0**mek-fspi.bin-flash_spl_flexspi

Added Make SOC=iMX8QXP REV=C0 flash

This command is for imx_mkimage, not build scfw. Imx_mkimage package SECO firmware contrainer, uboot, scfw together and build one image, which rom can recognize. From: Ramprakash Sent: Monday, February 8,...

Did your mkimage too old From: Ramprakash Sent: Monday, February 8, 2021 7:47 PM To: NXPmicro/mfgtools Cc: Frank Li ; Mention Subject: [EXT] Re: [NXPmicro/mfgtools] Not able to flash iMX8QX...

your image have not boot in customer board. Please check your image.

Because UUU support multi boards at the same time, it buffer the whole data. host virtual memory manage system can handle it well. If concern memory usage, I suggest decompress...

32bit system have problem. it is not easy to change read chuck now. Or long term provide option run at small memory size.