netmindz

I'm unsure why the webserver would not be responding for you with that particular chip If you use the ArduinoIDE and run the webserver example for ESP32 does that work...

When using tcpdump I take it this is with the broker address set to be the machine you are running tcpdump on?

I'll have a think about how to handle returning status when panel select has not been connected correctly

Welcome @Father-Chon and @danimaro to the project btw. Good to see more people using it. Please help spread the word to other hot tub owners. Being able to control from...

Please share info of your setup in https://github.com/netmindz/balboa_GL_ML_spa_control/discussions/24

Need to test properly, but should be addressed by https://github.com/netmindz/balboa_GL_ML_spa_control/pull/54

Sounds like for some reason it can't read data but it can send. One quick thing to try is swapping the A and B connections as data is received, but...

No need to connect RTS pin if you aren't using the max485

Any luck getting data read back @Father-Chon ?

Hi @Father-Chon , that's very useful to know you have the EL rather than GL. As far as I was aware till now they should be cross compatible with this...