shelly-homekit
shelly-homekit copied to clipboard
mongoose-os-apps
Support for Shelly Mini?
@timoschilling Does the new mini devices use same chip, do you plan to support it ?
https://www.shelly.com/en-bg/products/shop/shelly-plus-1-mini
I don’t have a test device, but possibly it will. The mini 1 would be a problem I think. The mini EM and mini 1pm would be harder.
In the mean time, I added my 1 Plus Mini's to HomeKit by installing Homebridge and Mosquitto MQTT broker on an old Mac Mini that I use as an AirPrint server.
Well I think that’s a good solution bc the plus minis get matter if Shelly releases a firmware update for it
I don’t have a test device, but possibly it will. The mini 1 would be a problem I think. The mini EM and mini 1pm would be harder.
I'd be more than happy to sponsor both a Shelly Plus 1 Mini as well as a Shelly Plus 1PM Mini to you :)
Updated mine to Tasmota 13.2 which supports matter. Is the method of injecting the bootloader really so different?
Finally, I have my Shelly Mini working in Homekit with HAA firm: https://github.com/RavenSystem/esp-homekit-devices
I followed these steps: https://www.youtube.com/watch?v=06YHkRkwJE4
I'd be more than happy to sponsor both a Shelly Plus 1 Mini as well as a Shelly Plus 1PM Mini to you :)
@cpm1 write me a email, address can be found on my profile.
write me a email, address can be found on my profile.
@timoschilling FYI, did so on 21st of December. If you didn't get it, please check your spam drawer.
write me a email, address can be found on my profile.
@timoschilling FYI, did so on 21st of December. If you didn't get it, please check your spam drawer.
I also sent a mail on 21st Dec. to offer also a sponsoring.
Any news on the Mini support? Currently using HB for them, but this is best.
If it helps, I’d like to sponsor a Shelly 1PM Mini Gen3 as well. Just drop me a PM. BTW, where are you located? To some countries shipping costs are more than the device costs.
Hi, Just wanted to know if there is any update on support for Minis, and if you think its possible to happen.
I accidentally ordered a "1 Mini, gen3". Specs say it has a "ESP-Shelly-C38F" CPU and 8 MB of memory as opposed to the 1 Plus Mini (4 MB).
From support forum:
All Gen3 devices are based on Shelly-C3F8 MCU. The Shelly-C38F are fully compatible with ESP32-C3, but with build-in more Flash and RAM which allow to save space into devices and give us possibility to add more features.
Hi all, is there any update for supporting the 1mini gen3? Would be great.
br lukas
@timoschilling is there any news on adding the new Shelly 1 Mini Gen 3 to the list of Homekit support?
@timoschilling is there any news on adding the new Shelly 1 Mini Gen 3 to the list of Homekit support?
I have an idea and I haven't bought a mini gen 3 yet but if you would like you can try it. You can. You can add it to home assistant and have home assistant running. Then you can get the HomeKit plugin on home assistant which should make your home assistant devices work on HomeKit.
I have an idea and I haven't bought a mini gen 3 yet but if you would like you can try it. You can. You can add it to home assistant and have home assistant running. Then you can get the HomeKit plugin on home assistant which should make your home assistant devices work on HomeKit.
I've done this, and its working great. I've got 3 mini gen 3's and a H&T sensor all in HomeKit via HA
Hello, thanks for the answer. I want to avoid having to setup a Homeassistant or homebridge with tasmota or anything like that as i have no need for more usage other than a switch. I already have 10 shellys with the mongoose implementation and they all work great. Seems like i have to wait or try to get one of the older Shelly 1s
I have an idea and I haven't bought a mini gen 3 yet but if you would like you can try it. You can. You can add it to home assistant and have home assistant running. Then you can get the HomeKit plugin on home assistant which should make your home assistant devices work on HomeKit.
I've done this, and its working great. I've got 3 mini gen 3's and a H&T sensor all in HomeKit via HA
Can you send a picture of what the HomeKit interface looks like with the Shelly's on there. I am planning on buying 10+ Shelly mini gen 3's @tobz-nz
@DHEVAN1 This is one room. The Lights is a Shelly mini & the Temp & Humidity are the H&T sensors.
The heater and lamp are other things.
Is this even being worked on anymore? I only ask as I can’t see a development branch or any comments regarding support for the Gen3 products.
Hi,
I do not think someone (@timoschilling ?) actively pursues Mini Support at this time. Though it should most likely not be that hard to add support, this takes time and resources which are limited for us currently .)
If you want to support, then you can do so with (in order): Writing Code, Donating Hardware, Testing, Money....
We will release a new version soon (Support for +2PM), and maybe Shelly Gen3 is the next step once this is completed.
Hi,
I do not think someone (@timoschilling ?) actively pursues Mini Support at this time. Though it should most likely not be that hard to add support, this takes time and resources which are limited for us currently .)
If you want to support, then you can do so with (in order): Writing Code, Donating Hardware, Testing, Money....
We will release a new version soon (Support for +2PM), and maybe Shelly Gen3 is the next step once this is completed.
I can help with two of those things - money and donating hardware.
I’ve already emailed @timoschilling offering money as I personally have used his firmware many times. If there is anyone else actively giving this ago (and willing to do a pull request) I’ll happily donate to you instead
Hi.
Let's talk after the current release, I hope this weekend.
Maybe Timon will give it a go, maybe I can do it. Let's see
I used HAA HomeKit firmware with my Shelly Minis. It's very easy to install using OTA and works great. Check it out: https://github.com/RavenSystem/mgos32toHAA