misteraddons
SCP-1080 (PSX) controller issue with two controllers attached
With two SCP-1080 controllers attached the UP button registers as UP+RIGHT and the down button registers as DOWN+LEFT. This can be seen in the Reflex Adapt screen. It occurs when connected to MiSTer or PC. With only one controller attached it works correctly.
With two SCP-1080 controllers attached the UP button registers as UP+RIGHT and the down button registers as DOWN+LEFT. This can be seen in the Reflex Adapt screen. It occurs when connected to MiSTer or PC. With only one controller attached it works correctly.
Is it on both controllers that up is up+right and down+left? Does it still happen with current firmware?
Hi,
It happens on both controllers and it still happens after I updated from 1.08 to 1.09.
I used Combo 12: NES+SNES, N64, Gen+Sat & PSX
Controller model is actually SCPH-1080.
On Monday, December 2, 2024 at 12:49:54 AM PST, Bryan Paradis ***@***.***> wrote:
With two SCP-1080 controllers attached the UP button registers as UP+RIGHT and the down button registers as DOWN+LEFT. This can be seen in the Reflex Adapt screen. It occurs when connected to MiSTer or PC. With only one controller attached it works correctly.
Is it on both controllers that up is up+right and down+left? Does it still happen with current firmware?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>
Also the same controllers both work perfectly with SNAX/SNAX64, so they're good.
On Monday, December 2, 2024 at 12:49:54 AM PST, Bryan Paradis ***@***.***> wrote:
With two SCP-1080 controllers attached the UP button registers as UP+RIGHT and the down button registers as DOWN+LEFT. This can be seen in the Reflex Adapt screen. It occurs when connected to MiSTer or PC. With only one controller attached it works correctly.
Is it on both controllers that up is up+right and down+left? Does it still happen with current firmware?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>
What pad names/types does it display on the screen with one controller and with two controllers?
Hi,
It displays "PSX" with one or two controllers connected.
I also have Dual Shock (SCPH-10010) controllers which work perfectly with two controllers connected.
On Sunday, December 15, 2024 at 12:10:33 AM PST, Bryan Paradis ***@***.***> wrote:
What does name/mode does it display on the screen with one controller and with two controllers?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>