aiocomfoconnect
aiocomfoconnect copied to clipboard
michaelarnauts
Invalid sensors values when using a heat exchanger
Hi, I’d like to know how to modify sensor parameter or declaration (maybe in Sensor.py). Because I did notice discrepencies between HA sensor and ComfoConnect-App sensor in my install. For exemple, outside- and ground- temperature seems to be switched See attached screenshots Thanks in advence.
Is it possible your orientation is Right?
If you use this in Home Assistant, it will be easier to swap the sensors there (in sensor.py)
In ComfoConnect App ist is left
Where can I find it in HA. I got only sensors shown, no device …
OK. I’ve found how to configure sensors in sensor.py. Now the question would be: how to integrate them in HA … what’s the link between them ?
How can I reconfigure « - outside_temperature » to match to the on ein sensor.py ???
Sorry for not replying sooner. The unit reports different temperatures on some sensors depending on if you have a heat exchanger.
Can you provide me a list of all sensor values from the app (preferably in English), and the output of all sensors from this library (show-sensors)? I will try to cross reference them with my sensor values (i don't have a heat exchange) and come up with a solution that works for all scenarios :)
Sorry for not replying sooner. The unit reports different temperatures on some sensors depending on if you have a heat exchanger.
Can you provide me a list of all sensor values from the app (preferably in English), and the output of all sensors from this library (show-sensors)? I will try to cross reference them with my sensor values (i don't have a heat exchange) and come up with a solution that works for all scenarios :)
Hi, thanks.
I didn’t change the language in English but translated it on the capture ;)
I also considered to use « HACS Zehnder ComfoAirQ integration » but the result is the same. i’d be happy if you find a solution.