Mike Causer

Results 113 comments of Mike Causer

Under the AliExpress logo, `Store:` pop down menu, `Contact Now` link

Have you installed the CH340G driver? Arduino getting started: http://www.wemos.cc/Tutorial/get_started_in_arduino.html

See `SJ2` under Power in the schematics. It’s normally not bridged and is so you can tie the EN pin to GND. It’s the enable signal for the LDO regulator,...

D4 is a constant, defined here: https://github.com/esp8266/Arduino/blob/master/variants/d1_mini/pins_arduino.h The ESP8266 GPIO pins do not always line up with development board pin names. D4 == GPIO2 Try replacing `D4` with `2`

See https://github.com/pbhogan/scrypt/pull/81

A few other DC-DC buck/boost modules which would be useful: LM2596: http://www.aliexpress.com/item/Ultra-small-LM2596-power-supply-module-DC-DC-BUCK-3A-adjustable-buck-module-regulator-ultra-LM2596S/967340975.html LM2596 with CC CV: http://www.aliexpress.com/item/Worldwide-Step-down-Adjustable-Power-Supply-Module-CC-CV-LED-DC-DC-LM2596-Driver-Wholesale/32307327583.html LM2596 mini: http://www.aliexpress.com/item/New-Mini-Converter-Adjustable-DC-DC-Step-down-Power-Supply-Module-replace-LM2596/2047085628.html XL4015: http://www.aliexpress.com/item/Hot-DC-DC-Step-Down-Converter-5-36V-to-1-25-32V-5A-Buck-Voltage-Regulator/32608703668.html RT8272: http://www.aliexpress.com/item/1pc-Module-4-75V-24V-to-0-92V-15V-DC-DC-Power-Supply-Buck-Converter-Step/32408995381.html MPSD16: http://www.aliexpress.com/item/RC-Airplane-Module-Mini-360-DC-Buck-Converter-Step-Down-Module-4-75V-23V-to/32266152653.html

Ask on https://forum.micropython.org/ and see if anyone else has experienced this. I don't actually own this board.

ADC3 pins: |pin|function| |-|-| |PF3|ADC3_IN9| |PF4|ADC3_IN14| |PF5|ADC3_IN15| |PF6|ADC3_IN4| |PF7|ADC3_IN5| |PF8|ADC3_IN6| |PF9|ADC3_IN7| |PF10|ADC3_IN8|

`public_key_to_address` can display the uncompressed address without creating a new `Key` instance. ```python >>> from bit import Key >>> from bit.format import public_key_to_address >>> k = Key.from_hex('0000000000000000000000000000000000000000000000000000000000000001') >>> k.address '1BgGZ9tcN4rm9KBzDn7KprQz87SZ26SAMH'...