Mayer Analytics

Hi, you have to modify the file `pySX127x/board_config.py` and adapt it to the bbone and your wiring. Just go through `board_config.py` and replace the RPi.* calls. This is quite straightforward,...

Out of the box the pySX127x certainly won't work. And the interface of the 1280 looks very different from the 127x one so you have to start from scratch, I...

Have a look at section 4.3 of the datasheet: The first byte is the address byte. It is comprises: - A wnr bit, which is 1 for write access and...

Can you describe your setup in more detail? One thing I notice is that you configure the Arduino code for 915MHz but you say you use the 433MHz band. Also,...

You have to modify `board_config.py` and adapt it to the BBB. The [Adafruit_Python_GPIO](https://github.com/adafruit/Adafruit_Python_GPIO) library might help you with this. In the description it says that it is "in an early...

Yes indeed. SPI is useless. Good point. But at a certain abstraction level these serial interfaces SPI, I2C, UART become interchangeable. I think this is pretty much the case here....

Yes indeed that is it. Thank you!

May I ask one more thing? How do you find out (in a systematic way, i.e. not by looking at examples), what the argument to the set/get functions is, e.g....

My guess is that you have to adapt `BOARD` because it's trying to set up GPIO pins that are already in use.

There's no deep reason for this. Running two or more LoRa instances on different boards *within the same program* seems meaningless because it's physically impossible on normal hardware. For this...