Maxfield Allison

@mrlt8 I have the packet cap files. I can provide them to you raw if you'd like to dig through. They capture everything on my security camera network both with...

I'm also going to do some further testing to see if it's that access point in particular and if so, what factors contribute. might move one of the more capable...

I tested a few changes in configuration, from lan to p2p, storm control on the AP ports at 100pps for broadcast and multicast. changed Docker container network mode to host...

All good, I've been on linux for awhile. I'll give it a shot in a few

So bizarre. Same behavior but the logs are a bit different. heres a snippet of a few lines here and there, most repeat several times a second. 2022/05/08 06:37:11 [py.warnings][WARNING][Deck...

> That is strange. Did it connect over a relay server `mode: 1` (0: P2P mode, 1: Relay mode, 2: LAN mode) under SInfoStructEx? mode 2 under info structure ```...

Ok, Removed the Driveway and Deck v3 cams by turning them off in the wyze app so only the sunroom v2 cam is running. ``` # - NET_MODE=P2P # -...

I've got a nest hello doorbell, a V2 and a Pan v1 connected to a unifi UAP-HD-Nano (along with laptops and phones galore) and its sitting at just over 30%...

I think the problem is incapable access points being overloaded by higher intensity applications than they're designed for. Added the rtsp v3 test cam to motion eye and connected it...

better yet just use the docker networking layer. as long as both containers are on the same bridge (not the default bridge) you can just use the name of the...