bfgminer
bfgminer copied to clipboard
luke-jr
stratum support disabled, on clean linux + bfgminer installation
Hi, resently i install ubuntu 14.04 and after compile bfgmier, and id try to whith stratum+tcp pool, debug log says:
HTTP request failed: Protocol stratum+tcp not supported or disabled in libcurl Failed to connect in json_rpc_call initiate_stratum with sockbuf=(nil) Stratum connect failed with TLS to pool 0: gnutls_handshake() failed: A TLS packet with unexpected length was received .
and retry after 15 s, but never connect.
i use libjansson4, libjansson-dev
i just upgrade from ubuntu 12.04, and the same link and credential works , only this new installation don't work
Well, there is no useful information in what you posted. Can you pastebin a FULL debuglog?
for mining with an asicblock erupter blade
[2014-08-03 04:10:50] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096) [2014-08-03 04:10:50] Started bfgminer 4.6.0-6-g8f60a5f [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:002:004: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:002:002: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:002:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:007:005: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:007:004: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:007:003: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:007:002: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:007:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:006:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:005:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:001:002: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:001:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:004:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] usb_devinfo_scan: Error opening device usb:003:001: LIBUSB_ERROR_ACCESS [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:003:001 (path=(null), vid=1d6b, pid=0001, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:004:001 (path=(null), vid=1d6b, pid=0001, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=1d6b, pid=0002, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=05a9, pid=2640, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:005:001 (path=(null), vid=1d6b, pid=0001, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:005:002 (path=(null), vid=10c4, pid=ea60, manuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:006:001 (path=(null), vid=1d6b, pid=0001, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:007:001 (path=(null), vid=1d6b, pid=0001, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:007:002 (path=(null), vid=0a5c, pid=4500, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:007:003 (path=(null), vid=413c, pid=8126, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:007:004 (path=(null), vid=0a5c, pid=4502, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:007:005 (path=(null), vid=0a5c, pid=4503, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:002:001 (path=(null), vid=1d6b, pid=0002, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:002:002 (path=(null), vid=125f, pid=a11a, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found usb device at usb:002:004 (path=(null), vid=152d, pid=2329, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:0b:00.0 (path=0000:0b:00.0, vid=14e4, pid=4315, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:09:00.0 (path=0000:09:00.0, vid=11ab, pid=4354, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:02:09.3 (path=0000:02:09.3, vid=1180, pid=0852, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:02:09.2 (path=0000:02:09.2, vid=1180, pid=0592, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:02:09.1 (path=0000:02:09.1, vid=1180, pid=0822, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:02:09.0 (path=0000:02:09.0, vid=1180, pid=0832, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1f.3 (path=0000:00:1f.3, vid=8086, pid=283e, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1f.2 (path=0000:00:1f.2, vid=8086, pid=2829, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1f.1 (path=0000:00:1f.1, vid=8086, pid=2850, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1f.0 (path=0000:00:1f.0, vid=8086, pid=2815, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1e.0 (path=0000:00:1e.0, vid=8086, pid=2448, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1d.7 (path=0000:00:1d.7, vid=8086, pid=2836, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1d.2 (path=0000:00:1d.2, vid=8086, pid=2832, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1d.1 (path=0000:00:1d.1, vid=8086, pid=2831, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1d.0 (path=0000:00:1d.0, vid=8086, pid=2830, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1c.4 (path=0000:00:1c.4, vid=8086, pid=2847, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1c.1 (path=0000:00:1c.1, vid=8086, pid=2841, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1c.0 (path=0000:00:1c.0, vid=8086, pid=283f, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1b.0 (path=0000:00:1b.0, vid=8086, pid=284b, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1a.7 (path=0000:00:1a.7, vid=8086, pid=283a, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1a.1 (path=0000:00:1a.1, vid=8086, pid=2835, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:1a.0 (path=0000:00:1a.0, vid=8086, pid=2834, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:02.1 (path=0000:00:02.1, vid=8086, pid=2a03, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:02.0 (path=0000:00:02.0, vid=8086, pid=2a02, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found pci device at pci:0000:00:00.0 (path=0000:00:00.0, vid=8086, pid=2a00, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:10:50] lowlevel_scan: Found vcom device at dev_t:00bc000000000000 (path=/dev/ttyUSB0, vid=0000, pid=0000, manuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001) [2014-08-03 04:10:50] No devices detected! [2014-08-03 04:10:50] Waiting for devices; press 'M+' to add, or 'Q' to quit [2014-08-03 04:10:50] Probing for an alive pool [2014-08-03 04:10:50] Testing pool stratum+tcp://stratum.triplemining.com:3334 [2014-08-03 04:10:50] HTTP request failed: Protocol stratum+tcp not supported or disabled in libcurl [2014-08-03 04:10:50] Failed to connect in json_rpc_call [2014-08-03 04:10:50] initiate_stratum with sockbuf=(nil) [2014-08-03 04:10:50] Stratum connect failed with TLS to pool 0: gnutls_handshake() failed: A TLS packet with unexpected length was received. [2014-08-03 04:10:50] Write select failed on pool 0 sock [2014-08-03 04:10:50] Closing socket for stratum pool 0 [2014-08-03 04:10:50] Failed to send s in initiate_stratum [2014-08-03 04:10:50] Initiate stratum failed [2014-08-03 04:10:50] Closing socket for stratum pool 0 [2014-08-03 04:10:51] No servers were found that could be used to get work from. [2014-08-03 04:10:51] Please check the details from the list below of the servers you have input [2014-08-03 04:10:51] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2014-08-03 04:10:51] Pool: 0 URL: stratum+tcp://stratum.triplemining.com:3334 User: dansanti_blade Password: blade [2014-08-03 04:10:51] Press any key to exit, or BFGMiner will try again in 15s. [2014-08-03 04:11:07] No servers were found that could be used to get work from. [2014-08-03 04:11:07] Please check the details from the list below of the servers you have input [2014-08-03 04:11:07] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2014-08-03 04:11:07] Pool: 0 URL: stratum+tcp://stratum.triplemining.com:3334 User: dansanti_blade Password: blade [2014-08-03 04:11:07] Press any key to exit, or BFGMiner will try again in 15s.
Shutdown signal received.
With antminer u2 with sudo ./bfgminer -S antminer:all -o stratum+tcp://stratum.triplemining.com:3334 -u dansanti_antminer -p antminer --set-device antminer:clock=x0981 --debuglog --log-file debug.txt :
[2014-08-03 04:15:46] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096) [2014-08-03 04:15:46] Started bfgminer 4.6.0-6-g8f60a5f [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:003:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 3.13.0-32-generic uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1a.0) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:004:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 3.13.0-32-generic uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1a.1) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=1d6b, pid=0002, manuf=Linux 3.13.0-32-generic ehci_hcd, prod=EHCI Host Controller, serial=0000:00:1a.7) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=05a9, pid=2640, manuf=OmniVision Technologies, Inc. -2640-07.07.20.3, prod=Laptop Integrated Webcam, serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:005:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 3.13.0-32-generic uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.0) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:005:002 (path=(null), vid=10c4, pid=ea60, manuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:006:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 3.13.0-32-generic uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.1) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:007:001 (path=(null), vid=1d6b, pid=0001, manuf=Linux 3.13.0-32-generic uhci_hcd, prod=UHCI Host Controller, serial=0000:00:1d.2) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:007:002 (path=(null), vid=0a5c, pid=4500, manuf=Broadcom, prod=BCM2045B2, serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:007:003 (path=(null), vid=413c, pid=8126, manuf=Broadcom Corp, prod=BCM2045, serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:007:004 (path=(null), vid=0a5c, pid=4502, manuf=Broadcom Corp, prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:007:005 (path=(null), vid=0a5c, pid=4503, manuf=Broadcom Corp, prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:002:001 (path=(null), vid=1d6b, pid=0002, manuf=Linux 3.13.0-32-generic ehci_hcd, prod=EHCI Host Controller, serial=0000:00:1d.7) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:002:002 (path=(null), vid=125f, pid=a11a, manuf=ADATA, prod=CH11, serial=C11A0222012051200005) [2014-08-03 04:15:47] lowlevel_scan: Found usb device at usb:002:004 (path=(null), vid=152d, pid=2329, manuf=JMicron, prod=USB to ATA/ATAPI bridge, serial=5ABFFFFFFFFF) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:0b:00.0 (path=0000:0b:00.0, vid=14e4, pid=4315, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:09:00.0 (path=0000:09:00.0, vid=11ab, pid=4354, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:02:09.3 (path=0000:02:09.3, vid=1180, pid=0852, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:02:09.2 (path=0000:02:09.2, vid=1180, pid=0592, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:02:09.1 (path=0000:02:09.1, vid=1180, pid=0822, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:02:09.0 (path=0000:02:09.0, vid=1180, pid=0832, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1f.3 (path=0000:00:1f.3, vid=8086, pid=283e, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1f.2 (path=0000:00:1f.2, vid=8086, pid=2829, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1f.1 (path=0000:00:1f.1, vid=8086, pid=2850, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1f.0 (path=0000:00:1f.0, vid=8086, pid=2815, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1e.0 (path=0000:00:1e.0, vid=8086, pid=2448, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1d.7 (path=0000:00:1d.7, vid=8086, pid=2836, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1d.2 (path=0000:00:1d.2, vid=8086, pid=2832, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1d.1 (path=0000:00:1d.1, vid=8086, pid=2831, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1d.0 (path=0000:00:1d.0, vid=8086, pid=2830, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1c.4 (path=0000:00:1c.4, vid=8086, pid=2847, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1c.1 (path=0000:00:1c.1, vid=8086, pid=2841, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1c.0 (path=0000:00:1c.0, vid=8086, pid=283f, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1b.0 (path=0000:00:1b.0, vid=8086, pid=284b, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1a.7 (path=0000:00:1a.7, vid=8086, pid=283a, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1a.1 (path=0000:00:1a.1, vid=8086, pid=2835, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:1a.0 (path=0000:00:1a.0, vid=8086, pid=2834, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:02.1 (path=0000:00:02.1, vid=8086, pid=2a03, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:02.0 (path=0000:00:02.0, vid=8086, pid=2a02, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found pci device at pci:0000:00:00.0 (path=0000:00:00.0, vid=8086, pid=2a00, manuf=(null), prod=(null), serial=(null)) [2014-08-03 04:15:47] lowlevel_scan: Found vcom device at dev_t:00bc000000000000 (path=/dev/ttyUSB0, vid=0000, pid=0000, manuf=Silicon Labs, prod=CP2102 USB to UART Bridge Controller, serial=0001) [2014-08-03 04:15:47] AMU: cgpu_set_defaults: Matched with set default: antminer:clock=x0981 [2014-08-03 04:15:47] AMU: Applying rule antminer:clock=x0981: Unknown option: clock [2014-08-03 04:15:47] antminer: Attempting to open /dev/ttyUSB0 [2014-08-03 04:15:47] Acquired exclusive advisory lock on /dev/ttyUSB0 [2014-08-03 04:15:47] antminer: Test succeeded at /dev/ttyUSB0: got 000187a2 [2014-08-03 04:15:47] antminer: Init: mode=default read_count=19 limit=0ms Hs=4.761000e-10 [2014-08-03 04:15:47] Acquired exclusive advisory lock on /dev/ttyUSB0 [2014-08-03 04:15:47] antminer: Work division not specified - autodetecting [2014-08-03 04:15:47] antminer: Work division autodetection got 04c0fdb4 (=1) [2014-08-03 04:15:47] Found AMU 0 at /dev/ttyUSB0 [2014-08-03 04:15:47] AMU 0: Init: baud=115200 work_division=0 fpga_count=0 [2014-08-03 04:15:47] Probing for an alive pool [2014-08-03 04:15:47] Testing pool stratum+tcp://stratum.triplemining.com:3334 [2014-08-03 04:15:47] HTTP request failed: Protocol stratum+tcp not supported or disabled in libcurl [2014-08-03 04:15:47] Failed to connect in json_rpc_call [2014-08-03 04:15:47] initiate_stratum with sockbuf=(nil) [2014-08-03 04:15:49] Stratum connect failed with TLS to pool 0: gnutls_handshake() failed: A TLS packet with unexpected length was received. [2014-08-03 04:15:49] Write select failed on pool 0 sock [2014-08-03 04:15:49] Closing socket for stratum pool 0 [2014-08-03 04:15:49] Failed to send s in initiate_stratum [2014-08-03 04:15:49] Initiate stratum failed [2014-08-03 04:15:49] Closing socket for stratum pool 0 [2014-08-03 04:15:50] No servers were found that could be used to get work from. [2014-08-03 04:15:50] Please check the details from the list below of the servers you have input [2014-08-03 04:15:50] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2014-08-03 04:15:50] Pool: 0 URL: stratum+tcp://stratum.triplemining.com:3334 User: dansanti_antminer Password: antminer [2014-08-03 04:15:50] Press any key to exit, or BFGMiner will try again in 15s. [2014-08-03 04:16:06] No servers were found that could be used to get work from. [2014-08-03 04:16:06] Please check the details from the list below of the servers you have input [2014-08-03 04:16:06] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2014-08-03 04:16:06] Pool: 0 URL: stratum+tcp://stratum.triplemining.com:3334 User: dansanti_antminer Password: antminer [2014-08-03 04:16:06] Press any key to exit, or BFGMiner will try again in 15s.
Shutdown signal received.
@luke-jr I get HTTP request failed: Protocol "stratum+tcp" not supported or disabled in libcurl. Fresh version of BFGminer and the linux I'm using.
