Multi-Button-WS2812-RGB-esp8266-Decora
Multi-Button-WS2812-RGB-esp8266-Decora copied to clipboard
logichousepcb
Parts links
Thank you for sharing! I'm looking at building some of these. Would you mind sharing links to the parts so that I ensure I get the correct size? notably the SMD ones. Perhaps some photos as well.
Thank you!
Have you already ordered some pcb’s? I have a never version. I can send you a parts list if I know which version you plan to build.
Sent from Mike's iPhone
On Sep 27, 2022, at 4:55 PM, Marc @.***> wrote:
Thank you for sharing! I'm looking at building some of these. Would you mind sharing links to the parts so that I ensure I get the correct size? notably the SMD ones. Perhaps some photos as well.
Thank you!
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.
I did order from the gerber's found here. I'm happy to order some of a new version too :) I have most parts, but want to ensure I have/order correct size for the SMD. I have some ESP32-C3-12F i may try on it as well. Thanks!
I’ll check it out later after work. I can’t remember which I posted there. I have 5 iterations of it. I do have some I c3 swapped. I have a 6 button version with temp and motion as well.
Sent from Mike's iPhone
On Sep 28, 2022, at 7:32 AM, Marc @.***> wrote:
I did order from the gerber's found here. I'm happy to order some of a new version too :) I have most parts, but want to ensure I have/order correct size for the SMD. I have some ESP32-C3-12F i may try on it as well. Thanks!
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.
This is the button I used but there is also a thinner version that works depending on the 3d printer button used. https://www.amazon.com/gp/product/B07H9R9YMJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
The AMS1117 is a standard 3.3 version
I used these leds but they are a standard size so a 5v ws2812 will work since these are discontinued https://www.lcsc.com/product-detail/Light-Emitting-Diodes-LED_Worldsemi-WS2812E_C139127.html
The resistors are 1206 size 10k and 4.7k
C4 = https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-SMD_ROQANG-RVT1C100M0405_C72483.html C3 = https://www.lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-SMD_KNSCHA-RVT100UF10V67RV0036_C2891567.html
I hope that works. Let me know if you have any questions
On Wed, Sep 28, 2022 at 8:06 AM Michael Degenaars @.***> wrote:
I’ll check it out later after work. I can’t remember which I posted there. I have 5 iterations of it. I do have some I c3 swapped. I have a 6 button version with temp and motion as well.
Sent from Mike's iPhone
On Sep 28, 2022, at 7:32 AM, Marc @.***> wrote:
I did order from the gerber's found here. I'm happy to order some of a new version too :) I have most parts, but want to ensure I have/order correct size for the SMD. I have some ESP32-C3-12F i may try on it as well. Thanks!
— Reply to this email directly, view it on GitHub https://github.com/logichousepcb/Multi-Button-WS2812-RGB-esp8266-Decora/issues/1#issuecomment-1260771668, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARQRG65LUUJEHXY363PDYNLWAQUGVANCNFSM6AAAAAAQXE5MYE . You are receiving this because you commented.Message ID: <logichousepcb/Multi-Button-WS2812-RGB-esp8266-Decora/issues/1/1260771668@ github.com>
I’ll check it out later after work. I can’t remember which I posted there. I have 5 iterations of it. I do have some I c3 swapped. I have a 6 button version with temp and motion as well. Sent from Mike's iPhone …
Do you have the tasmota pinout template for the C3 or esphome config?
It’s bellow the esp-12f template in the github page.
Sent from Mike's iPhone
On Sep 28, 2022, at 8:19 PM, Marc @.***> wrote:
I’ll check it out later after work. I can’t remember which I posted there. I have 5 iterations of it. I do have some I c3 swapped. I have a 6 button version with temp and motion as well. Sent from Mike's iPhone …
Do you have the tasmota pinout template for the C3 or esphome config?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.