t102-v1.1 PA15 pin issues

[voed]

Hi. I have a generic smart socket with energy monitor based on t102 board. It has connected BL0937's SEL pin to PA15, so according to #155, i am used version: 1.6.0 to avoid the bootlop. But looks like the pin just does not work anymore, i have created the gpio switch to manually switch between voltage and current and it is still reports the same values. After changing to board: wr2, it worked:

[14:12:23][D][sensor:093]: 'rtlsocket_voltage': Sending state 0.43395 V with 1 decimals of accuracy
[14:12:23][D][sensor:093]: 'rtlsocket_power': Sending state 2.02600 W with 1 decimals of accuracy
[14:12:23][D][sensor:093]: 'rtlsocket_energy': Sending state 0.47667 Wh with 1 decimals of accuracy
[14:12:26][D][hlw8012:082]: Got power=2.7W, voltage=0.4V
[14:12:26][D][sensor:093]: 'rtlsocket_voltage': Sending state 0.37196 V with 1 decimals of accuracy
[14:12:26][D][sensor:093]: 'rtlsocket_power': Sending state 2.70133 W with 1 decimals of accuracy
[14:12:26][D][sensor:093]: 'rtlsocket_energy': Sending state 0.47892 Wh with 1 decimals of accuracy
[14:12:26][D][switch:012]: 'rtlsocket_sel_switch' Turning ON.
[14:12:26][D][switch:055]: 'rtlsocket_sel_switch': Sending state ON
[14:12:29][D][hlw8012:082]: Got power=2.7W, voltage=327.1V
[14:12:29][D][sensor:093]: 'rtlsocket_voltage': Sending state 327.07501 V with 1 decimals of accuracy
[14:12:29][D][sensor:093]: 'rtlsocket_power': Sending state 2.70133 W with 1 decimals of accuracy
[14:12:29][D][sensor:093]: 'rtlsocket_energy': Sending state 0.48117 Wh with 1 decimals of accuracy
[14:12:32][D][sensor:093]: 'rtlsocket_power': Sending state 2.70133 W with 1 decimals of accuracy
[14:12:32][D][sensor:093]: 'rtlsocket_energy': Sending state 0.48343 Wh with 1 decimals of accuracy

Don't mind the values, it is still uncalibrated, but at least now i can calibrate. So looks like the last commit just prevents 15 pin from changing the state for t102.

Full configuration:

rtl87xx:
  board: wr2
  framework: 
    version: 1.6.0
switch:
    - platform: gpio
      pin: 0
      name: ${hostname}_switch
      id: ${hostname}_switch
      restore_mode: ALWAYS_OFF
      device_class: outlet
    - platform: gpio
      pin:
        number: 15
        allow_other_uses: true
      name: ${hostname}_sel_switch
      id: ${hostname}_ssel_switch
      restore_mode: ALWAYS_OFF
binary_sensor:
    - platform: gpio
      pin:
        number: 18
        mode: INPUT_PULLUP
        inverted: true
      name: ${hostname}_button
      on_release: 
        - switch.toggle: ${hostname}_switch


status_led:
  pin: 
    number: 23
    inverted: true

sensor:
  - platform: hlw8012
    model: BL0937
    sel_pin:
        number: PA15
        allow_other_uses: true
        #inverted: true


    cf_pin: #D1 #4
      number: PA5


    cf1_pin: #D0 #5
      number: PA12

    current:
      name: ${hostname}_current
    voltage:
      name: ${hostname}_voltage
    power:
      name: ${hostname}_power
    energy:
      name: ${hostname}_energy
    #voltage_divider: 860
    current_resistor: 0.001
    
    update_interval: 3s
    #initial_mode: CURRENT
    change_mode_every: 8