kevtuning

Thanks for the explanation @vyruz1986 . I have a stupid question/idea. Is the Aircon trying to reply to HA or to the MQTT server ? If it's MQTT, we could...

My idea was to use a MQTT bridge in the IOT Vlan in combination with your workaround PR. In the IP you specify, you put the IP of the MQTT...

I was referring to this: http://www.steves-internet-guide.com/mosquitto-bridge-configuration/

> I've made a PR with a workaround (the ability to specify the IP address in configuration) to this issue, tested it on my setup and it fixed the communication...

Wow after letting it like that for some hours and a tenth add-on restart it works!

Thank you for your investigation ! I have the same issue with proxmox from 12.0 I will definitely check my VM memory config when back home... (I know that there's...

rename the json config file and to restart the add-on Since then... no more issue

Damn, I have again the issue.... We absolutely need to understand what's happening... to fix it It seems like that the AC isn't working with FGLair neither... so I would...

Indeed rebooting the AC seems like to solve the issue ... for the moment. My theory is that the module is receiving too much requests and finally blocks... But anyway...

> I don't see the temperature on the thermostat card but mqtt sends the correct data as in the FGLair application. Link to paste in HA for installation: https://github.com/xury77/AirCon.git Hi...