Kevin V.

@javand Whenever the issue appears again can you also ssh into the box and run `dmesg` and post the output as well? It will let us see if theres any...

It doesn't have to be /dev/hidraw0, it'll use whatever you provide in the config. However, your logs look like the dongle isn't sending anything back. I've only seen that happen...

Unfortunately without hidraw support by Synology DSM I don't think this will work. kernel.org seems to indicate that "[hidraw] differs from hiddev in that reports sent and received are not...

Hi all. Please update to the latest `0.0.7` through HACS or the master branch. You'll also need to set the device to "auto" instead of "/dev/hidraw1"

Okay yeah that happens when theres a low level error communicating with the hub. It looks like im going to have to add in more robust retrying. Thanks for the...

Hi everyone, I'll try to do a deep dive on this tonight. I have unfortunately been unable to reproduce it (hmm maybe I should try unplugging the dongle while HA...

Hi @beeferific, Can you enable debug logs for the component (instructions provided at bottom of README)? Whenever that issue occurs can you please post the log? Also to ensure that...

Also you mentioned sensors not initially showing but appearing after a state change. That's a built in recovery mechanism if it isn't able to get the list of sensors initially,...

@schettada Can you also enable debug logging (from the instructions at the bottom of the readme) and submit another issue? The logs are super super helpful for me to track...

Great thank you for all that information and for enabling that debug logging. Everything that you're describing (including the services not appearing) occur when the component fails to handshake with...