jschwalbe

> Move button and Relay to channel 1, set -1 for channel 1 and report back. > >  Ok, I did the above changes, and set both startup values...

> 1 | VBAT Power supply pin (3.3 V), which is connected to the VBAT pin on the internal IC 2 | PWM2 -> P8 pin 3 | GND Power...

> Would you mind to try my supposal and move the button to another channel than the relay? Is the button working as expected when they are on the same...

Came here because it wasn't working as well. Probably helpful to put it earlier in the README.